Free Super Saver Shipping Eligible Learn More

Align 24k gilt terminal

0 0
SKU: K10149A-1
You will earn 4 points for buying this product

Availability: In Stock

$3.99
As low as $0.37/mo with Affirm Learn More
Write a review earn 100 points

Description

Details

Product:
Schematic Drawing:
● First, use the insulation sleeve(the smaller side of inside diameter) to cover the red (positive) wire on the positive electrode. ● Add solder tin to the gilt terminal pin contact & leading wire, and then solder both sides with a flat iron. (Caution: be sure you have soldered correct electrode/wire). ● Push the insulation sleeve over the gilt terminal using an implement to push it into the fixed position, which is shown by the arrow.

 

● After soldering the gilt terminal socket contact, cover with the insulation sleeve. ● The connection with the speed controller.
Specification:
(mm)

Instructions:

Accessories:

 

●Made with alloy copper, having high electrical conductivity
●Surface coated with high electrical conductivity material
●Continuous and high current resistance (50A)
(Caution !!! Never use different sizes of socket or pin's on 3mm's gilt terminal; for example, 3.5mm etc. It may cause problems, such as improper electric conduction, erratic motor starts, and the ESC may lose power.)
●3mm 24K gilt terminal pin contact x 3pcs
●3mm 24K gilt terminal socket contact x 3pcs
●High temperature-resisting insulation sleeve x 6 PCS
●Gilt