Product:
Schematic Drawing:
● First, use the insulation sleeve(the smaller side of inside diameter) to cover the red (positive) wire on the positive electrode.	● Add solder tin to the gilt terminal pin contact & leading wire, and then solder both sides with a flat iron. (Caution: be sure you have soldered correct electrode/wire).		● Push the insulation sleeve over the gilt terminal using an implement to push it into the fixed position, which is shown by the arrow.
● After soldering the gilt terminal socket contact, cover with the insulation sleeve.	● The connection with the speed controller.
Specification:
(mm)
Instructions:		Accessories:
●Made with alloy copper, having high electrical conductivity ●Surface coated with high electrical conductivity material ●Continuous and high current resistance (50A) (Caution !!! Never use different sizes of socket or pin's on 3mm's gilt terminal; for example, 3.5mm etc. It may cause problems, such as improper electric conduction, erratic motor starts, and the ESC may lose power.)		●3mm 24K gilt terminal pin contact x 3pcs ●3mm 24K gilt terminal socket contact x 3pcs ●High temperature-resisting insulation sleeve x 6 PCS ●Gilt

There are currently no product reviews.

Write Review

Displaying 0 of 0 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion