Align Scale Fuselages – Bringing Scale Detail to Life with Quality, Performance & Functionality. Looking for your next scale project? Look no further than Align scale fuselages, which feature the quality construction desired by those looking for the best that can be delivered.

Align brings true scale to life with this stunning rendition of the McDonnell Douglas MD500E. A latter variant of the MD500D, the MD500E model features a pointed, aerodynamic nose & larger cabin layout, and has proved to be an incredible platform, serving in all manners of service, such as Military, Police, and ENG (Electronic News Gathering) platforms. The MD500E is a beautiful helicopter that continues to thrill to this day, and Align brings this to life in true scale detail, allowing your RC helicopter to take on an amazing look that will surely stand out from all the rest.

Adding scale touches, such as scale paint & markings, scale exhaust vents, aircraft “tail numbers,” and (2) LED Light-Ready (LED lights not included) fixtures, this fuselage is finished with stunning detail that will bring a thrill on the ground and in the air. Coalescing this beautiful scale detail are functional touches, such as magnetic battery hatches, which enable you to quickly & easily change batteries & access your helicopter without the fuss & both of tools.

Finished with quality automotive based paints & constructed with high quality fiberglass, Align has your scale needs covered, and offers a full lineup of exciting scale designs that feature the detail & quality you would expect from Align. Adding to this is the included hardware necessary to make your build work – functionality that makes your build enjoyable, rather than tedious & frustrating.

When you’re looking to add a whole new look to your RC helicopter, Align has you covered – offering everything you need to bring scale detail & beauty to life.

Product Detail:
Accessory Info 1:
Accessory Info 2:
Illustration: (Suitable for T-REX600 Nitro / 600E.)
Length, Width, Height & Lateral View:
Package:
Information:	Specifications:
●Suitable for ALIGN T-REX600 Nitro / 600E.	●Body Length: 1250mm (49.21 in. / 4.10 ft.) ●Body Width: 360mm (14.17 in.) ●Body Height: 490mm (19.29 in.) ●Weight: 1300g (2.86 lbs.)
	Included:
	●500E Canopy x 1 ●500E Fuselage x 1 ●Vertical stabilizer x 1 ●Horizontal Stabilizer x 1 ●Landing skid x 4 ●Skid pipe x 2 ●Fuselage frame 600E(Front) x 1 ●Fuselage frame 600E(Rear) x 1 ●Fuselage frame 600N(Rear) x 1 ●Pipe mount x 1 ●Light Cover x 2 ●Exhaust guide(Φ11.5xΦ17x230mm) x1 ●Servo pole x 4 ●Washer(Φ3.2xΦ10x0.8mm) x 4 ●Washer(Φ3.3xΦ8x0.5mm) x 4 ●Socket button head screw(M3x6mm) x 8 ●Socket collar screw(M3x16mm) x 2 ●Socket collar screw(M3x35mm) x 2 ●Socket screw(M3x12mm) x 4 ●Self-tapping screw(T3x10mm) x 6 ●Set screw(M3x3mm) x 4 ●Ball link x 2 ●Tail control guide x 1 ●600N Rudder control rod x 1 ●600E Rudder control rod x 1 ●Nylon strap(2.5x160mm) x 2

Current Reviews: 1

Submited By: LELAND on 03/15/2010 I mounted my T-Rex-600E directly into the frame as it was, (perfect fit) the only modification I had to make was the wooden cross plates supplied were replaced with two aluminum plates cut to fit, and I had to cut off about 3/4 in off of the boom to allow for a clearance of the tail fin assy. The first flight was great, there is some getting familiar with the new frame, The second flight and new battery, I put it too the test and I tell you the truth it was amazing the scale look and performance. Good looking ship. NOTE THE FRONT COVER IS VERY FRAGILE AND IS EASILY DAMAGED, CARE SHOULD BE TAKEN

Write Review

Average Customer Rating: Displaying 1 of 1 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion