Product:
Instructions:	Specification:
● The cold light string is driven by AC electricity.The home use electricity 110V 60Hz makes less rightness and more inconvenient. So it needs specified driver(transducer). ● The brightness depends on the driver. Different length of string uses different driver ●Low power consumption. With DC6-7.2V, it uses electricity as well as 0.068-0.088A/M,0.088-0.108A/2M,0.121-0.154A/5M.	● Enclose cold light circuit output adapter x2pcs(soldered),Powe supply:DC5-8V ●Enclose cold light circuit output adater x2pcs(soldered) ● Driving distance:total 5 meters(serial or parallel connection) ● Dimension:25x20x9mm ● Weight:16g
	Accessories:

Current Reviews: 5

Submited By: Mehmet Erdem on 05/19/2009 It worked in two tests. But after it got so much heat. I made it cool. But this does not help even it's not so hot but it's gone :-( Now I need another better one.

Submited By: Monty on 03/01/2009 driver worked about 5 flights and the wire broke off, i got a new one and it doesnt work at all, it makes noise and thats it.

Submited By: Zaw on 12/28/2008 One of them blew out so I got another one, hook up to light strings and took it for flight and every thing went dark. lucky there was enough light to land my heli. This driver was smoking!

Submited By: Rami on 09/23/2008 initially it worked fine, until the poorly soldered wire broke off and the was no solder point left to fix it. Typical Align elecronics. I recommend the great planes version.

Submited By: Zaw on 07/19/2008 The driver requires load to work properly. If you don't have anything lights plug in and give it power it will over heat and quit.

Write Review

Average Customer Rating: Displaying 5 of 5 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion