Product:
(Instruction Manual)
Illustration 1:Measure individual cell voltage for 2 to 8S lithium packs.(Align balance plug)
Illustration 2:Illustration 2: Including Pitch 2.0mm TP 2~8S balance adapter.
Illustration 3:Servo diagnostic feature. Displays receiver signal output.
Illustration 4:Use this tester to control ESC and measure the propeller rotating speed.
Package:
Instructions:	Specification:
1.For RC model electrical equipment diagnostic and measurement use. 2.High precision display of individual cell voltage for 2 to 8S lithium packs.In addition to individual cell voltage, it also displays total pack voltage as well as percentage of pack's remaining capacity. 3.Displays serial cell count in a pack, as well as highest and lowest cell voltage, and the voltage difference. 4.Servo diagnostic feature. Displays BEC output voltage and receiver signal output. 5.Digital tachometer to display 2 to 7 propeller rotating speed as well as memory for highest RPM attained. 6.Reverse polarity protection for cell input.	●Voltage measurement range: 2-8S Lipo/Li-ion. ●Voltage display resolution: 0.001V ●PPM manual signal output 2270us-770us ●PPM automatic signal output: 1520us ±(120-630us) ●Number of propeller measurable: 2 to 7 ●Propeller rotating range: 1-60000RPM, measurement distance: 5-15cm ●BEC input voltage range: 4-7v ●Battery input terminal spec: 2.5mm pitch pins, compatible with Align compatible balancing plugs.
	Accessories:
	●Balance adapter D x 1  (Compatible with TP balance plug of same specification)

There are currently no product reviews.

Write Review

Displaying 0 of 0 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion