Product:	Package:
Apply to 2-4cells Li-ion/Li-ploymer Battery
Instructions:	Specification:
1.Reverse polarity protection and short circuit protection.(warning beep)。 2.AC 100-240V exchange switch for international specification. 3.Supply 3.6V / 3.7V 2-4 cells Li-ion/Li-polymer battery. 4..For both balance charge and charging in series. It is a fast, convenient design. 5.Balance charging is good to prevent the situation of over-charging or under-charging for a single cell. 6.Auto-detected charge status display. (Red light: while charging Green light: end of charging) 7.Cooling fan and multi-circuit protection to avoid the dangerous of charging. 8.The auto-detected function of low voltage for power storage. Charge Method: 1.Series DC7.4V JST connector X 2 sets (no more parallel charge plug in) 2.Series DC11.1V 20A connector X 1 set(no more parallel charge plug in) 3.Balance DC7.4V connector X 2 sets 4.Balance DC11.1V connector X 1set 5.Balance DC14.8V connector X 1 set(avalible refit to DC11.1V balance connector ) Single cell circus can be parallel charging 2 sets at the same time by balance charging. Divide up 500mAh for 2Cell. The maximum suggestion is 8cell for parallel charging. ● approval(GTK-0503030)、 approval(GTK-0503118)。 Click to view User Manual	●Dimension: Length 135 x width 80x height 35 (mm) ●Series no: RCC-4CX ●Input Voltage: AC 100-240V 50-60Hz ●Output Voltage: 2cell DC 7.4V 3cell DC 11.1V 4cell DC 14.8V ●Output Current: 1000 mA/cell
	Precaution:
	Note! If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens. ●Recommend this Li-ion/Li-polymer charger for the safty and efficiency of

Current Reviews: 6

Submited By: John on 08/17/2008 THIS LOOKS GOOD BUT THE DESCRIPTION IS IN PATHETIC BROKEN ENGLISH. I WILL NOT BUY WHEN YOU REFUSE TO TARGET YOUR MARKET WITH APPROPRIATELY WORDED DESCRIPTIONS. MAKES ME WONDER WHAT ELSE ABOUT THIS PRODUCT IS SUB-STANDARD. NO SALE!

Submited By: GARY on 10/16/2007 Proof that You don't have to spend a roll of Money to get a good charger. Works perfectly and I like charging 2 at a time. Good customer support from this site as well.

Submited By: Hong on 10/01/2007 Great charger! Works flawlessly.

Submited By: James on 06/02/2007 Got mine a couple days ago, Much Smaller than i thought it'd be but this charger works like a CHAMP. I've ran probably 15 or so charges thru it already and it charges the stock 1000mah battery I got with my King v2 in no time and charges the Mega Power 1350mah 15c Battery just as quick but slightly longer. I recommend this battery to anyone who has 3 or 4 batteries or more to charge and is willing to wait while each battery charges, If i ever get more than 4 batteries I will probably buy another one of these. Great for Any Beginner using 2-4 cell batteries. This Charger is much safer than the stock charger I got with my King v2. None of my batteries nor the charger have ever gotten hot while batteries were being charged. I Had No Need To Spend $100+ When This One Works Just Fine and Charges Fast Enough For Me. The End.

Submited By: William on 05/22/2007 I've been happy with this charger. Balances cells to within 8/100v. Can charge/balance 2 of the 7.4v 2S at a time. Takes about an hour or so. Very simple operation. Chinese directions.

Submited By: Zafer on 04/29/2007 Prize / performans is very good. Because Charge 4cell. 1+3 2+2 or 4. Polarity is very simple. like +-+-+- I am charge 2 unit thunder power 22,2V 5000ma battery with 3 unit rcc-4cx. Thunder power balance connector diagram is: http://www.techmodelproducts.com/images/balancer_connections.jpg or http://www.thunderpower-batteries.com/documents/TP210_manual_R3.pdf You must change balance connector polarity for charge thunder power.

Write Review

Average Customer Rating: Displaying 6 of 6 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion