15MT Tail Motor Assembly (8000KV/1103)

Align
|
HML15M12T
You will earn 24.99 points for buying this product
Price Match Guarantee
$24.99 $0.00( / )
Suitable for T15. 1103 Brushless tail motor, high temperature resistance, durable, high-speed operation, excellent tail locking ability. Specification: Input voltage: 2S KV value: 8000KV Stator Dimension:1103 Stator Arms: 9 Magnet Poles: 6 Dimension: 2.6x13.8x17.7mm Weight: 6.4g Package included: 15MT Tail Motor x 1

Suitable for T15.

1103 Brushless tail motor, high temperature resistance, durable, high-speed operation, excellent tail locking ability.

Specification:

Input voltage: 2S
KV value: 8000KV
Stator Dimension:1103
Stator Arms: 9
Magnet Poles: 6
Dimension: 2.6x13.8x17.7mm
Weight: 6.4g

Package included:

15MT Tail Motor x 1

Type: 

Helicopter Part

Vendor: 

Align

SKU: 

HML15M12T

Weight: 

0.09 lb


Product Spare Parts

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Andres
good quality a bit expensive

Perfect and good to have on stock

h
h.n.

I went through two of these bad boys, and it went pretty well. I had a hard time keeping the connector when pushing it through the very end. This tail yaw motor really make a boom for the head core plate.

J
Jim M.
Align T15 tail motor

After many joyful hours of flying my little Align T15, I noticed that my main motor appeared a little wobbly. The flight time also was down about one minute. Too, the tail motor was a little hesitant to start up. So, I decided to replace both motors. I bought both motors first from another vendor only because they had another part in stock that HeliDirect did not at the time.

It was pretty easy to change out the main motor. Not so much for the tail motor.

I started to install the tail motor, but before I even got it mounted to the tail motor mount, I discovered that two of the three tiny little motor wires were broken. I passed this along to the vendor (again, not HeliDirect) and asked them to check with Align to see if they would replace it. It quickly became clear that they weren’t into satisfied customers, so I abandoned that approach and ordered another one from HelidDirect.

It’s a real chore to install the tail motor. It’s not too hard to worry the three little tiny wires and connectors through the tail-motor housing, but that’s just the beginning of the effort. You will soon find that you have to continue feeding the wires through another little hole at the other end of the tail boom – dire near impossible for me. However, I did finally succeed with the three tiny little wires still intact.

I did a little research and see that Align came up with a new tail motor and cable arrangement for the Align T150. The motor itself has a short pigtail with a connector that attaches to a separate longer cable that routes through the boom on to the ESC. This allows you to tread the cable through the boom without risk of destroying the motor by breaking a wire. The cable is also available separately and is cheap. Align needs to make a similar option available for the T15. They might want to take a look at the OMP M1 EVO tail motor which also uses a separate cable.

As always, HeliDirect shipped my order straightaway with no issues.

T
Tim B.
T15 Tail Motor

I had to replace the original tail motor due to a broken connection. I received the replacement in a very timely fashion. Written instructions we're included. In no time I was back up in the air. I love doing business with HeliDirect!

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Andres
good quality a bit expensive

Perfect and good to have on stock

h
h.n.

I went through two of these bad boys, and it went pretty well. I had a hard time keeping the connector when pushing it through the very end. This tail yaw motor really make a boom for the head core plate.

J
Jim M.
Align T15 tail motor

After many joyful hours of flying my little Align T15, I noticed that my main motor appeared a little wobbly. The flight time also was down about one minute. Too, the tail motor was a little hesitant to start up. So, I decided to replace both motors. I bought both motors first from another vendor only because they had another part in stock that HeliDirect did not at the time.

It was pretty easy to change out the main motor. Not so much for the tail motor.

I started to install the tail motor, but before I even got it mounted to the tail motor mount, I discovered that two of the three tiny little motor wires were broken. I passed this along to the vendor (again, not HeliDirect) and asked them to check with Align to see if they would replace it. It quickly became clear that they weren’t into satisfied customers, so I abandoned that approach and ordered another one from HelidDirect.

It’s a real chore to install the tail motor. It’s not too hard to worry the three little tiny wires and connectors through the tail-motor housing, but that’s just the beginning of the effort. You will soon find that you have to continue feeding the wires through another little hole at the other end of the tail boom – dire near impossible for me. However, I did finally succeed with the three tiny little wires still intact.

I did a little research and see that Align came up with a new tail motor and cable arrangement for the Align T150. The motor itself has a short pigtail with a connector that attaches to a separate longer cable that routes through the boom on to the ESC. This allows you to tread the cable through the boom without risk of destroying the motor by breaking a wire. The cable is also available separately and is cheap. Align needs to make a similar option available for the T15. They might want to take a look at the OMP M1 EVO tail motor which also uses a separate cable.

As always, HeliDirect shipped my order straightaway with no issues.

T
Tim B.
T15 Tail Motor

I had to replace the original tail motor due to a broken connection. I received the replacement in a very timely fashion. Written instructions we're included. In no time I was back up in the air. I love doing business with HeliDirect!