Product Details
For pilots wanting top notch 3D performance, along with ease & functionality when it comes to programming, look no further than the Curtis Youngblood Solid G Gyro/ G View for the ultimate in tuning ability. The Solid G Gyro is preferred among top pilots, and with the "G-View" system, programming can't get any easier. Featuring the ability to access hidden menu's of the Solid G, this quick setup capable system allows you to fine tune the performance of your gyro, allowing you to fly harder than ever before. For those looking for the best in gyro technology, check out this feature packed 3D combo that will save you time, frustration, and best of all, money!
Solid G Heading Hold Gyro:
This is the "Solid G" heading hold gyro from Curtis Youngblood
Enterprises. This high performance heading hold gyro is for heart
pounding 3d maneuvers. Fully optimized for aggressive 3D and Precision
flying, and features an amazingly constant pirouette rate and solid
straight line hold. Allows for the use of any tail servo, and is a
breeze to setup.
The
Solid G allows for the use of any tail servo currently available on the
market, from the Futaba 9256 to the JR 8700g. All you have to do is
pick which servo you will be using from the menu and plug it in. Also
the unit allows you to select the type of helicopter you are flying.
Vibe, Stratus, Trex 600 and Synergy all have preprogrammed "base maps"
to make it that much easier to tune the unit to your machine.
- Sensor Type: SMM (Silicon Micro Machine)
- Weight: 68g (38g amp) + (30g sensor)
- Dimensions: 44x28x11.5mm (1.73x1.1x0.45") (amp)
- Dimensions: 30x30x18 mm (1.18x1.18x.71") (sensor)
- Gain Type: Transmitter-controlled remote gain
- Operating Voltage: 4.8V to 7.0V DC
- Reversing Switch: Yes, via G-View unit
- High/Low Frame Rate Select: Yes, operates with all current frame rates
- Servo Travel Limiter: Yes
- Power consumption: 70mA (@5.0V, including sensor)
G-View Display Unit - YEI-YE-GVIEW:
Designed for use with the ATG, Solid G, ect. Makes for an easy and
quick setup, allows access to hidden menus for extra fine tuning of
your ATG, Solid G, Ect.
- Plug in the G-view and turn on the radio.
- Hold down the "P" button for 6 seconds. This brings you into initial setup mode. You do not need to change this if you have already gone through the initial setup in the manual.
- Now hold down the "P" button again for 6 seconds. This brings you to the Model Type. Do not need to change this, although for the 600N make sure you are set on T-rex600. It will flash the model setting quickly when you enter this mode then switch to asking you if you want to switch it to a Vibe.
- Now push and hold "P" for 6 seconds to enter the Pirouette menu. Now you want to change the default settings in this menu as listed above. Scroll to each parameter by pushing the "P" button briefly and releasing. Then use the "L" and "H" buttons to decrease and increase the value. Once you are done making the changes to the Parameter menu push and hold "P" for 6 seconds to move to the next menu (Response menu)
- Make the needed changes in the Response menu (see list above) then push and hold "P" for 6 seconds to move on to Parameter menu.
- Make the one change in the Parameter menu as listed above. Then turn off the radio.
- The gyro is now ready to fly.
The Solid-G gyro was designed to be used with the G-view. In our opinion, the G-View is a must, but NOT a necessity! The gyro will work PERFECTLY without it.They are not packaged together as a set because once you purchase 1 G-View you do not need to buy any more. Even if you have 5 ATGs and 5 Solid-Gs you only need 1 G-view.
