The E1200 is a fine-tuned propulsion system designed for multi-rotors weighing 7-15kg (15-33 pounds). This kit allows you to upgrade or build a flight system of your choice.
With an enhanced efficiency, safety and reliability under extreme conditions, the E1200 unlocks many possibilities for professional aerial photographers and enthusiasts.
The Standard version includes the 4216 motor, 40A smart ESCs, and 17-inch ultra-carbon folding propellers.
Unlike the highly-integrated E1200 Pro version, the E1200 Standard version’s components are separated, giving you the flexibility and freedom to work with a much wider range of frames.
17-Inch Ultra-Carbon Folding Propellers
One of the largest of the Z-Blade series, these 17-inch propellers boost both efficiency and thrust.
An advanced ultra-carbon fiber composite provides the rigidity of metal propellers, but at a lower weight.
The classic folding design protects your propellers during transportation and use simple and efficient.
Improved Motor Cooling
To increase the lifetime and reliability of your motors, a built-in centrifugal fan actively cools each one.
The grid-shaped structure along the top allows efficient ventilation while keeping dust and other debris out.
The rib-designed base enlarges the heat dissipation area by 200-300％, greatly enhancing the passive cooling power of the system.
Next Generation Smart ESCs
The sine-wave drive ESCs increase power efficiency by capturing energy produced during deceleration.
They constantly gather and transmit diagnostic information on the status of your propulsion system in real-time.
Active braking provides a better dynamic response.
When compared the 4114 motors with 15-inch propellers, the E1200 Standard can increase flight time by nearly 30％ at the same takeoff weight.
With greater thrust, the maximum takeoff weight can be increased by 1.8-2.4kg (when used on 6-8 axes).
Moreover, the E1200 Standard is capable of working in temperatures of up to 60˚C and taking off at altitudes of upto 2000m, higher than with previous generations.
* Your results may vary depending on environmental conditions and other factors.
- Flight time extended by nearly 30％
- Max take-off weight increased by 1.8-2.4 kg
- Operating temperatures up to 60˚C
- Altitude limit increased by 2000 m
Each ESC receives real-time diagnostic data from the motor and visually communicates its status via high-visibility LEDs.
This provides you with an instant warning in the event of an abnormal motor function.
Spark-proof circuitry protects your system when plugging in or unplugging the power source.
Free Future Upgrades
The E1200 features a duplex communication port, which lets you to easily and independently upgrade the ESC firmware for free with any future updates.
(Note: Updating accessories for the DJI Smart ESC are required and are sold separately.)
Standard vs Pro
The E1200 Pro and E1200 Standard share the same core design and inner components.
Integrated structure, complete with 25mm-diameter arm tube for greater convenience.
Separated structure, offering a wider range of platform compatibility.
In The Box
- 2 x 4216 Motors (CW+CCW)
- 2 x 1760 Carbon Fiber Folding Propellers (CW+CCW)
- 2 x 640S ESCs, 2 x ESC external LEDs, 2 x JST3 Pin Cables
- Accessories Kit:
Screws for Folding Propellers (M3×12.5)
Screws for Propeller Mount Cover (M3×8)
3900 g/rotor (25 V,Sea Level)
Takeoff Weight Recommended
1200 ~ 1400 g/rotor (Sea Level)
Takeoff Weight Max
1700 g/rotor (Sea Level)
-10°C ~ -60°C
Max Allowable Voltage
Max Allowable Current (Persistent)
PWM Input Signal Level
3.3 V / 5 V Compatible
30 Hz ~ 450 Hz
Weight (With Cable)
Weight (Without Cable)
Diameter / Thread Pitch