Product Details
Download Manual
This is the ElectriFly Triton2 Computerized Battery Charger, Discharger
and Cycler from Great Planes.
Triton2 incorporates the following feature improvements over the Triton;
Charge current increased to 7A (was 5A)
Handles LiPo packs with up to 5 cells in series (was 4 cells max.)
LCD now includes a blue backlight for easy viewing (Triton's LCD not backlit)
Input cord has banana plugs but includes attachable large alligator clips
(Triton only had gator clips)
Rotating dial is raised and modified for easier control
FEATURES: Great for many applications including airplane and heli batteries,
Tx and Rx batteries, field batteries and more
Handles 1-24 cell NiCd/MH (1.2 - 28.0V)
1-5 cell Li-Ion or LiPo (3.6 or 3.7V cells)
6, 12, 24V Pb cell (2V per cell)
Precision Zero DeltaV Peak Detection with adjustable sensitivity
for NiCd and NiMH batteries
"Constant Current / Constant Voltage" charge method for Pb and
Li-Ion/LiPo batteries
Fast charge thermal cutoff (GPMM3151 thermal probe available
separately)
Top-off charge feature fully charges NiMHs without overheating
0-250mA adjustable TRICKLE charge current (NiCd and NiMH only)
0.1-3.0A adjustable discharge current
Adjustable discharge cutoff voltages for NiCd/MH, pre-set voltages
for Pb and LiPo/Ion
Perform 1 to 10 cycles (NiCd/MH only)
Recall data for 10 full cycles
Configure up to 10 batteries in memory for instant, easy recall and
charger setup
Displays input and output volts, peak volts, avg dsch volts, chg and
dsch capacity, currents and time, error messages (no battery
connected, open circuit, and reverse polarity)
Audible sound cues aid in programming and notification of function
changes
Warning messages for improper input voltage, poor connections,
unsuitable battery condition, reverse polarity on output
Safety features include cool-off time delay, maximum NiMH charge
input, fast charge safety timer, current overload and reverse
polarity protection
Built-in cooling fan for better charge efficiency and extended
charger life
Small and lightweight, with a super-sturdy aluminum case for rugged
durability
Full 1 year warranty
INCLUDES: ElectriFly Triton2 Computerized Battery Charger, Discharger and
Cycler with banana plugs with mating alligator clips and
instruction manual
SPECS: Input Voltage: 11.0-15.0V DC
Input Connections: Banana plugs with mating gator clips
Number of Outputs: One
Battery Types, # cells: 1-24 NiCd/MH (1.2-28.0V)
1-5 Li-Ion or LiPo (3.6 or 3.7V cells)
6, 12, 24V Pb (2V per cell)
Fast Charge Current: 0.1-7.0A linear NiCd/MH (0.1A step, 90W max)
1C rating for LiPo/Li-Ion (90W max)
Fast Charge Termination: Zero DeltaV peak detection NiCd/MH
CC/CV for Pb and Li-Ion/LiPo
optional thermal cutoff for all battery types
Peak Sensitivity: NiCd 5-20mV, NiMH 3-15mV
Peak Delay at Start: 0-60 minutes
TRICKLE Charge Current: 0-250mA (NiCd/MH only)
Fast Charge Safety Timer: 0-990 minutes
NiMH Max. Charge Cap: 0-9900mAh
NiMH Top Off Charge: 0-1000mA
Thermal Cutoff: 50-150°F (10-65°C), sensor optional
Discharge Current: 0.1-3.0A
Discharge Cutoff Voltage: NiCd/MH 0.5-1.16V per cell (0.9V/cell fixed
during cycle)
Pb fixed at 1.8V per cell
Li-Ion/LiPo fixed at 2.8V per cell
Cycle Count: 1-10 cycles (NiCd/MH only)
Cycle Time Delay: 1-60 minutes
Battery Memories: 10 battery memories
Programming Controls: Modified jog dial, 2 pushbuttons
Display Type: 2 x 16 LCD with blue backlight
Displayed Info: Input and output volts, peak volts, avg dsch volts,
chg and dsch capacity, currents and time, data for 10 cycles,
errors
Audible Indicators: 10 Melodies, ON/OFF
Output Connectors: Banana jacks
Case Material: Extruded aluminum
Cooling System built-in fan
Current Overload: solid state
Case Size: 6.2 x 4.0 x 2.0 in (157 x 102 x 51mm)
Weight: 16.4 oz. (466g)
