Size: 98 * 34 * 19mm / 3.85 * 1.33 * 0.75 inch

Weight: 130 g / 4.58 oz

Discharge rate: 15C

Product description:
All Esky Li-Poly batteries are designed to deliver the highest performance with JST connectors. These batteries can withstand 8.5C average discharge rate under normal loading.
The 11.1V max discharge rating is 15C.

Attention:
* Fire and/or serious injury can result under certain conditions, if battery is not cared for in a safe, proper manner.
Be sure to follow all instructions with battery and charger. Never leave equipment unattended while charging.
* Please keep battery away from combustibles.
* When charging, the battery must be removed from the helicopter for safe use.
* Please make sure to set correct voltage for the charger, along with the correct mah. When charging, keep battery in a cool environment.

Recommend Substitution Parts

These are substitution or aftermarket/optional parts we recommend.

$0.00

Check out Related products

$0.00

Current Reviews: 2

Submited By: Adam on 01/19/2009 Battery is perfect for testing setups and modifying stuff on your Belt cp. I wouldn't recommend flying though. I used it to just hover and check servos and only got about 4 four minutes flying time. not very decent. power seems low to me for some reason compared to stock 1800mah battery. also it is a little on the light side and messes with the CoG on the belt. What can I say it's a battery. OH, by the way. you have to solder your own deans connector to it, so make sure you pick up some if you get this. just type Dean in search and look for female dean connectors. it doesnt come with one.

Submited By: Cory on 09/27/2007 i like this battery a lot for the Belt CP or the King V2. Good battery, no puffing after 40 cycles.

Write Review

Average Customer Rating: Displaying 2 of 2 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion