【Specification】

(1).3 LiPo battery;
(2).Maximum electric current in moment:50A;
(3).Maximum continue electric current:25A(280W);
(4).BEC electric current:5.0Vs/2A;
(5).Weak electricity protection:9.2V;
(6).Temperature overload protection:95°C.

Recommend Substitution Parts

These are substitution or aftermarket/optional parts we recommend.

Add This Item

Pentium-25A

HobbyWing Pentium Brushless ESC 25A

$29.99

Current Reviews: 6

Submited By: Joseph on 12/16/2009 This ESC will work fine as long as you run a separate BEC, this way, alot of the load is taken off of this ESC, and it will not run hot, another thing to be careful with on the Belt Cp heli is proper belt tension, and lubeing the belt with silicon spray, also make sure to acheive proper pinion to gear mesh, everything must run smooth and free...

Submited By: creepy on 09/18/2009 i would not recomend this speedo..... the one that came on my king 3 fizzeled out after approxamatly 35 + flights in mid air.... causing more cost in repairs than what a nicer speedo would have cost.

Submited By: Keith on 09/19/2008 Has great luck with this ESC. Much better than trying to use a Dynam ESC on a King 2. Its not a Phoenix ESC, but its does WELL. I see the bad reviews below, I can see the Belt CP issue, not a good idea with such a small ESC, on a King 2, problem lies in user error. If it caught on fire, that was the user not paying attention and gearing properly or using proper battery pack for the application. If going to use this, make sure you read up on Heli set up and info on temps and how to fix if running a bit warm. I never had a SINGLE issue after countless flights. THIS IS A GREAT SPORT FLYING ESC, but very bad idea from esky to use on the Belt CP.

Submited By: Thomas on 07/09/2008 This speed controller is okay. I use it with my 3900kv motor on my Honeybee King 2. Though I think it is a bit over-priced for what it is capable of. It's worked great for me so far...

Submited By: John on 06/04/2008 This does not work well for the ESKY 3800kv motor.

Submited By: Paulo on 03/14/2008 i have this esc on belt cp with gy401 and 4 hitech hs55 servo. i guess it was the 50th flight in my belt cp and it started on fire. i was using in the second battery pack. i don't recommend this speed controller you can see the video of this happening to me here: http://www.youtube.com/watch?v=c35lyJnAd5I

Write Review

Average Customer Rating: Displaying 6 of 6 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion