Product Details:

The B6D is a compact Lipo, Lion, LiFe balancer/charger and Nicad/NiMH/Pb charger. It features a high performance microprocessor and specialized operating software. It features a maximum charge power of 50W (0.1-5.0A).

 

The B6D features an internal cell balancer, using Align type balance connectors. It will disconnect the charge circuit and alarm automatically if any malfunction is detected.

 

The B6D also features a ‘storage' mode, perfect for placing you expensive batteries at the correct voltage level for hibernation over the winter months.

 

This charger requires a 11-18V DC input. Perfect for use either at home or at the field.

 

Specifications:

• Operating voltage rang: DC 11.0~18.0 volt

• AC to DC adaptor (DC 11.0~18.0V/5A)

• Circuit power: Max. charge power 50W

• Max. discharge power 5W

• Charge current range: 0.1~5.0A

• Discharge current range: 0.1~1.0A

• Current drain for balancing Lipo: 300mAh/cell

• NiCd/NiMH battery cell count: 1~15cell

• Li-ion/Polymer cell count: 1~6 series

• Pb battery voltage: 2V~20V

• Weight: 260g (Net Weight)

• Dimensions: 117*85*30mm

• Color: Black

Adapters Included:

• Input adapter with alligator clips for connecting to 12v power supply

• Banana plug to male ultra deans

• Female ultra deans to alligator clips

• Female ultra deans to JST

• Female ultra deans to glow plug

• Female ultra deans to female Futaba

NOTE:  Charger uses Align style balance connector. Use SHI-W adapters  to charge batteries that uses Thunder Power/Outrage XP style balance connector

This combo set contains the following items: » 1 x F-Flying B6D V8 MultiFunction Balance Charger (1-6Cells)    [FF-B6DV8]   $49.99 » 1 x F-Flying Adapter 12V 5A for B6D V8 Charger    [FF-A12V]   $13.99 0.00 - 57.99 = -57.99Cost of separate parts: $63.98 You save $5.99

There are currently no product reviews.

Write Review

Displaying 0 of 0 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion