Product Details
This is
the Mode 2 Helicopter Version Futaba 10CG Transmitter and R6014FS 14-ch
Receiver with the 2.4GHz FASST system. No Servos Included. This version
is Mode 2 **For European Standard Mode 1 order FUTK9258**
This heli version will default to helicopter settings, with mode 2
stick operation when powered up and has a non-ratcheted throttle stick.
Features
-
Futaba 10CGH 2.4GHz Integrated R6014HS Heli Mode 2 FUTK9256
-
Futaba's FASST (Futaba
Advanced Spread Spectrum Technology) shifts very quickly virtually
eliminating signal conficts and interruptions unlike other 2.4GHz systems
that only stay on one or two frequencies
-
Dual antenna diversity enables
FASST system to automatically and seamlessly select the best reception
between the two antennas built into the receiver ensuring that the aircraft
stays under constant control of transmitter regardless of altitude
-
Graphics for programming swash
plate types, swash ring and logic switches allowing timer activation or
other function just by changing positions of specific sticks or functions
-
6 programmable heli mixes
-
Hover/pitch
-
Hover throttle
-
8 swash plate types with
graphics
-
Swash AFR
-
5 point revo mixing
-
Gyro menu
-
7 point throttle and pitch
curves with delay
-
High/low pitch setting
-
Throttle hold and three
idle-ups with delay
-
One year limited warranty
Specifications
-
Transmitter;
-
Power Supply: 9.6V NT8S700B
NiCd battery
-
Receiver;
-
Receiving Frequency: 2.4GHz
-
Power Requirement: 4.8 - 6V
-
Current Drain: 70mA
-
Size: 2.06 x 1.48 x 0.63"
(52.3 x 37.5 x 16.0mm)
-
Weight: 0.72oz (20.8g)
Contents
-
Futaba 10C Transmitter with
Module
-
NT8S700B 9.6V 700mAh NiCd
Transmitter Battery , FUTM1460
-
NR4J 600mAh NiCd Receiver
Battery, FUTM1280
-
FBC-19B RX, TX Wall Charger,
FUTM1830
-
R6014FS Receiver, FUTL7644
-
Switch Harness
-
8" (203mm) Servo Extension
-
Neck Strap, FUTM5690
Requirements
Comments
-
This radio is available in the
following default modes;
-
Air Mode 2, FUTK9255
-
Heli Mode 2, FUTK9256
-
Air Mode 1, FUTK9257
-
Heli Mode 1, FUTK9258
-
This system can also be
operated on 72MHz by purchasing the Transmitter Antenna (FUTM5110), and the
72MHz Module (FUTL1516) and using a compatible receiver.