Product Details
Futaba 10CGH 2.4GHz R6014HS Intergrated Heli Mode 1 FUTK9258
This is the Mode 1 Helicopter Version Futaba 10CG Transmitter and
R6014HS 14-ch Receiver with the 2.4GHz FASST system. No Servos Included
This version is Mode 1 **For USA Standard Mode 2 order FUTK9256**
This heli version will default to helicopter settings, with mode 2
stick operation when powered up and has a non-ratcheted throttle stick.
Features
-
Futaba 10CGH 2.4GHz R6014HS Intergrated Heli Mode 1 FUTK9258
-
Futaba's FASST (Futaba
Advanced Spread Spectrum Technology) shifts very quickly virtually
eliminating signal conficts and interruptions unlike other 2.4GHz systems
that only stay on one or two frequencies
-
Dual antenna diversity enables
FASST system to automatically and seamlessly select the best reception
between the two antennas built into the receiver ensuring that the aircraft
stays under constant control of transmitter regardless of altitude
-
Graphics for programming swash
plate types, swash ring and logic switches allowing timer activation or
other function just by changing positions of specific sticks or functions
-
6 programmable heli mixes
-
Hover/pitch
-
Hover throttle
-
8 swash plate types with
graphics
-
Swash AFR
-
5 point revo mixing
-
Gyro menu
-
7 point throttle and pitch
curves with delay
-
High/low pitch setting
-
Throttle hold and three
idle-ups with delay
-
One year limited warranty
Specifications
-
Transmitter;
-
Power Supply: 9.6V NT8S700B
NiCd battery
-
Receiver;
-
Receiving Frequency: 2.4GHz
-
Power Requirement: 4.8 - 6V
-
Current Drain: 70mA
-
Size: 2.06 x 1.48 x 0.63"
(52.3 x 37.5 x 16.0mm)
-
Weight: 0.72oz (20.8g)
Contents
-
Futaba 10C Transmitter
-
NT8S700B 9.6V 700mAh NiCd
Transmitter Battery , FUTM1460
-
NR-4RB 1000mAh NiCd Receiver
Battery, FUTM1380
-
FBC-19B RX, TX Wall Charger,
FUTM1830
-
R6014HS Receiver, FUTL7645
-
Switch Harness
-
8" (203mm) Servo Extension
-
Neck Strap, FUTM5690
Requirements
Comments
