S9650 is the best servo for T-REX tail. It is very popular for T-REX now as it can give very quick and precise tail response.

Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.14sec/60 degrees at no load
Operating Speed (6.0V): 0.11sec/60 degrees at no load
Stall Torque (4.8V): 50 oz/in. (3.6kg.cm)
Stall Torque (6.0V): 62.5 oz/in. (4.5kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: All Nylon Gears
Connector Wire Length: 12"
Dimensions: (43 x 15 x 28.6mm)
Weight: .92oz. (26g)

Current Reviews: 4

Submited By: joe on 09/03/2009 _p_Using this on my HDX450SE and the tail is flawless. Love this servo!!!!!_/p_

Submited By: Bob on 09/08/2008 Excellent servo for the Trex 500 with the GY401 gyro.

Submited By: Mehis on 05/12/2008 Great digital servo for HDX500 tail to go along with GY401 gyro.

Submited By: Cory on 12/18/2007 Great tail servo for the Align T-Rex 450 or the E-Sky Belt CP. I love it!

Write Review

Average Customer Rating: Displaying 4 of 4 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion