Product Details
Download Manual Here
Product Details
Another big step up in quality, performance from the awesome HDX450SE, the HC500 kit represents another hottest heli on the market with some CNC aluminum and fiber composite parts. This new 500-size heli is not as big as a T-REX 600 but just a bit bigger than a T-REX 450. Using 6S1P batteries that are widely used on T-REX 500 and 425mm blades, this is the ideal size for everyone who wants to have another kit besides the T-REX 450SE without spending tons of money on battery for T-REX 600. The quality and craftmanship is SUPERB!
This HC500 is an almost complete redesigned helicopter from HDX500SE by Charley Stephens and being intensively tested by world top 3D pilot Henry Caldwell. After months of testing and revising, the HC500 helicopter kit is finally at its optimized hard core 3D condition. Henry Caldwell said "This is the new HC 500. Charley Stephens reworked the hdx 500. I did all the testing for the improved heli. We decided to call it the HC 500, since I devoted alot of my time and feedback to the project. The HC 500 HAS alot of new features: new flybar cage for more flybar teeter without binding, new bladegrip arm that has a extra hole for adjustable ratio, new threaded flybar with new hc 500 paddle, new designed frames that will take sub- micro servos or mini servos, frames also have a adjustable battery tray for adjusting cg with battery, new designed canopy, shorter mixing arm that allows higher pitch applications, mainblade and tailblade grips have larger opening to accept standard blades
This heli can be docile to quick, it flys and tracks very well.
henry caldwell-"
Specifications:
- Length overall: 860mm
- Main Rotor Diameter: 950mm
- Tail Rotor Diameter: 180mm
- Weight: 865grams(kit)
- Main Blades: 425mm carbon fiber blades
- Frame: Carbon Fiber and CNC parts
- Main Gear: 140T 0.6M
- Front pulley: 65T
- Tail pulley: 14T
Package Include:
- 425mm Carbon Fiber blades
- All CNC aluminum Frame parts and carbon fiber side frames
- All CNC aluminum head system
- All CNC aluminum tail system
- Aluminum tail boom
- Carbon Fiber tail fin set
- High quality painted fiberglass canopy by FUSUNO
- Powerful 1320KV Brushless motor
- Color box.
Features:
- Super strong aircraft aluminum 7075 CNC parts
- Shorter mixing arm to allow higher pitch applications
- Adjustable motor mount for easy adjusting motor gear mesh
- Main and tail blade grips have larger opening to accept standard blades
- Totally new main pulley 65T to increase tail speed and better tail authority
- New 140T main pulley to allow multiple battery and motor options
- Fully equipped with high performance ball bearings, more than any other models in its class
- New design frame that accepts micro and mini servos.
- Adjustable battery tray to allow adjust C.G. with battery
- New designed taller main center hub to avoid binding at max pitch
- New mixing arms with new mixing ratios for extreme 3D
- New sleek designed fiberglass canopy by FUSUNO
- Incredible power brushless motor 1320KV by OUTRAGE
- Very high quality 430mm carbon fiber main blades
- Equipped with new design 3D paddle, longer tail blade, longer tail fin, longer mixing arms and longer washout levers for faster response.
Bobby Smith, HC500 at JAX RC 4 April 2009
All Spare Parts available.
Recommend Battery: MegaPower 2500mAh 6s1p, OUTRAGE XP 2500mah 6s1p
Recommend Gyro: GY401 or Logictech 2100T
Recommend Receiver: Futaba R146P, Berg 7, AR7000, AR6200
Recommend Servos: InoLab HG-D251MG, Hitec servos HS81MG or HS85MG for cyclic, InoLab HG-D261HB, Futaba S9650 or S9254 for tail servo
Buy this and one of these related products...
| | |
|
|
$0.00 |  |
| | |
|
|
$0.00 | |
