Product Details
With traditional technology, a micro receiver has lower sensitivity (control distance) than a full-sized receiver. HDX Digital receivers use a state-of-the-art receiver chip, careful filtration, and DSP technology to achieve full-range while remaining small and lightweight. With this combination, the HDX Digital receivers have capabilities usually only found in older technology receivers weighing several dozen grams. Because of their light weight, the HDX Digital receivers can be used in many applications including indoor electric aircraft, 3D fixed-wing airplanes, and outdoor glow planes of several kilograms or pounds. With a sensitivity of better than 2µV, the HDX Digital receivers have a full range. These receivers use dual tuned RF circuitry with dual ceramic IF filters which ensure an ultra narrow selectivity to more effectively reject adjacent channel interference. This is especially important when flying high traffic areas where many transmitters may be operating near each other.
HS610 is a 6-channel, full-range and ultra narrowband receiver. When you install it in an electronic 3D helicopter, the mini size will let you connect the plugs of 6 servos / ESCs more easily. 3D helicopter and 3D fix-wing plane have strict demand of the reliability and response speed of the receiver. The decoder, which uses DSP, can guarantee enough response speed, and reject glitch effectively. The full-range and narrowband guarantee the reliability of the receiver. It makes sure that your plane is under good control all the time in a busy flight field with numerous transmitters. Because of its small size, HS610 can be put into a small and exquisite external dimension, micro indoor electronic planes, park aircrafts, 3D helicopters and 3D fix-wing planes. The full-range and narrowband capacities enables it control the gliders and glow planes easily.
Note: Channels may be reversed due to label sticker being reversed. If receiver seems to not work properly, try the opposite channel - i.e. Ch #6 is Ch. #1, Ch #5 is Ch #2, and so on.
Specifications:
| Size |
1.3”x0.75”x0.32”(33x18.9x8.2mm) |
| Weight |
0.25oz/7.2g (with shrink wrap) |
| Sensitivity |
about 2.0μV |
| Selectivity |
±8kHz at 65dB down |
| Number of channels |
1-6 |
| Filtering |
Dual turned RF circuitry |
| Filtering |
Dual 4 element ceramic filter |
| Filtering |
DSP filtering in MCU with mild algorithm |
| Shift polarity |
Positive or negative (auto-detect) |
| Case |
Shrink wrap |
| Operating Voltage |
4.8V~6.0VDC |
| Operating Current |
11mA |
| Modulate |
FM/PPM(pulse position modulation) |
