Refer to the instructions here on how to setup the gyro for best performance

This is the Hitec HG-5000 Micro Heading Lock Gyro
and HSG-5083MG Micro Digital Tail Rotor Servo.

FEATURES: Gyro Features;
Optimized high response narrow band Hitec signal
Universal signal selectable, functions with both analog and digital
servos
Auto detection for any transmitter and receiver
Precision control technology for heading lock
Remote gain adjustment
Self diagnosis function
Low power consumption (20mA)
Extreme tolerance against disturbance and vibration
Easy data setting and simple LED display
Micro Digital Servo
Optimized for 400-600 class EP helicopters
All metal gear applied (1st MP gear)
Non-programmable

INCLUDES: Hitec HG-5000 Micro Heading Lock Gyro and HSG-5083MG Micro Digital
Servo, instruction

REQUIRES: Assembly and adjustment onto the helicopter

SPECS: Gyro;
Size: 0.86 x 0.86 x 0.43" (22 x 22 x 11mm)
Weight: 0.35oz (9.9g)
Power Consumption: 20mA

Micro Digital Servo;
Size: 1.14 x 0.51 x 1.18" (29 x 13 x 30mm)
Weight: 0.74oz (21g)
Torque: 20.85 oz.in @ 4.8V
Speed: 0.07 sec/60° @ 4.8V

Current Reviews: 4

Submited By: KEVIN on 05/10/2009 I installed this gyro on a G5 and am very pleased. I don't notice any drift. Adjusting the servo for rate mode was the hardest part. I love the ease of adjustment and that you set individual end points for left & right.

Submited By: Scott on 03/10/2009 This gyro is a waste of money. My telebee gyro with a generic servo holds better than this thing. I would suggest buying the logitech 2100 combo it's a much better gyro/servo combo.

Submited By: Tom on 04/12/2008 Well Gerald, at least your servo worked. Mine was junk right out of the box.However ,I did like the easability of programing the gyro.I,m sending the servo back for replacement and hopefully no more problems.

Submited By: Gerald on 04/02/2008 Great combo! But, good luck trying to get replacement parts for this servo. After I installed and fine tuned it I had a mechanical failure on it's first flight causing a crash breaking the case off of the boom mount. Nowhere, are there replacement cases or gears available for this servo! Pretty sad for a company to release a new item to rave reviews without having parts available at the same time!

Write Review

Average Customer Rating: Displaying 4 of 4 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion