• Instruction Manual

 

• 
• The only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class).
• Only a short time needed for completion. (95% factory assembled)
• Preassembled kit comes with new 5600kv BL motor and 18A ESC.
• Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears.
• New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
• New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
• New CNC Rigid Mixing Arms provide the high strength and rigidity to withstand crash.
• New CNC Rotor Head and Stop Plate.
• New CNC Mast Mount.
• New CNC Integrated Tail Boom Clamp and Middle Mount.
• New CNC Motor Mount comes with 2 motor mounts (Front or Rear).
• New CF (1mm) mainframe set which is suitable for sub-micro and micro servo (Such as the size of GS-045HB or HS-45HB or HS-65MG servo).
• New CF Fin and Tail.
• New light-weight fiber glass painted canopy.
• High Performance Stabilizer Blades and Tail Rotor Blades.
• Kit comes with additional longer flybar produces quick response to 3D maneuver.
• Kit comes with additional Gold Plated Connectors (1.8mm) with Heat Shrink Tubing for Motor and ESC
• High Rigidity Landing Gear Brace.
• The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum.
• Fully equipped ball bearings.(33 pieces of micro bearings)
• Seesaw head with bell-hiller system.
• CCPM collective pitch mechanism (variable pitch).

Specification:

• Overall length: 415mm (including cabin & canopy)
• Main rotor diameter: 428mm
• Tail rotor diameter: 110mm
• Motor: KV5600 brushless motor (included)
• ESC : 18A ESC (included)
• Flying weight: 280g ~ 300g (It may vary according to size of a battery pack and R/C gears.)
• Main rotor blades: 200mm SP Blades(included) or Wooden(option)
• Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery

Items needed for assembly:

• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 3 Sub-micro or Micro servos for CCPM(Such as GS-045HB or BMS 306BB or HS-45HB or HS-65MG servo)
• 1 Micro Digital servo for tail control.
• 6 (or more) channel micro receiver
• Gyro ( GU -210 heading hold gyro or higher level are recommended)
• Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
• Charger: Li-Po battery charger

There are currently no product reviews.

Write Review

Displaying 0 of 0 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion