Product Details
Hyperion is already known as a world-wide leader in advanced battery chargers, and continues to push development forward. The newest 0615i DUO3 provides a wide feature set, and unmatched power to suit 5C-chargeable batteries like the new G3 Lipo.
SUPER POWER, DUAL CONVENIENCE
The new Hyperion EOS 0615i DUO3 charger will cover all of your charging needs. It is a dual port balancing charger, capable of charging up to two 6S packs either independently or in sync mode. It is rated at 180W (15A) per port, and up to 50W (10A) per port discharge. It requires an 11-28V DC input.
The charger is extremely easy to use, and allows high charge rates for fast pack charging to keep you flying. The included balancers keep all cells balanced during the charge process. The user has the ability to control power supply current draw, and the chargers firmware is user-upgradable to allow advantage to be taken of future feature advances - USB cable included and the latest software is free to download.
The charger really is two chargers in one. Both ports can be run independently so you are able to charge two completely battery packs (Lipo, Lion, A123) at the same time. You can also run the charger in ‘Duo’ mode, allowing the charging of two batteries of the similar size as a single unit – allowing the charger to make a flight pack of 7-12S.
The charger comes with balance port adaptors to suit Hyperion balance tabs. Additional adaptors are available to fit other brands of battery.
The Duo3 brings several improvements over the previous Duo2:
* 12-Bit Balance Circuit Resolution for superb accuracy
* Built-In USB DataPort and supplied USB cable
* Hardware support for PC Control & Logging Software
(Bi-Direction release before Dec 2009. Logging available now)
* 20 Memory slots for batteries per port (40 total)
* CYCLE mode for LiFePO4 and LiPo
* Max Current per port raised from 10A to 15A
Specifications & Features:
- 180W per port (6S @ 8A), 360 Watts max (12S @ 8A) CHARGE Output
- 0.1A to 15.0A max CHARGE Current in 0.1A steps (subject to 180W/port limit with 14.5V+ DC PS)
- 50W Per Port DISCHARGE with 10A Max Current
- STORE MODE allows fast and simple charge/discharge to ~60% capacity for proper storage of Lithium Batteries = longer battery life.
- Charges/Discharges 1 to 6 cells Lithium Polymer Batteries Per Port (3.7V/cell nominal types)
- Charges/Discharges 1 to 6 cells Lithium Ion Batteries Per Port (3.6V/cell nominal types)
- Charges/Discharges 1 to 6 LiFePO4 (A123) cells (3.3V/cell nominal types)
- Charges/Discharges/Cycles 1-16 cell NiCd/Ni-MH in three modes: Normal, Linear, and Automatic
- Charges/Discharges 1~12 cell Lead Acid Batteries (Pb, 2V/cell)
- Allows Lithium-Type batteries to 50,000mAh and PB (lead/acid) batteries to 100Ah capacity
- Two built -in Hyperion LBA10/300 Balancers with 10A max rating and 300mA max balance rate/cell
- 12-bit Resolution Balance Circuits for max accuracy
- TCS - Terminal Capacity Selection
- Rich Data Displays during and after charging and balancing
- USB PC Port for Data Logging, Firmware upgrades, and future PC Control Software System (Sept1~Nov1 2009)
- Temperature Sensor Ports & Temp Stop settings*
- Wide Voltage Input Range 11v~28v for higher efficiency when charging high-voltage packs, and compatibility with a wider selection of AC/DC power supplies
- Power Supply Amperage Control to allow reliable charging with lower-output power supplies
- Power Supply Voltage Control (PS Load Control) works in concert with Amperage control to insure the charger does not overload your variable power supply
- Adjustable Power Sharing % between Outputs
- Input Cable with 4mm Male Connectors + Clamps
- Output Cable Set Included, with 4mm Connectors
- Two, Integral, Thermostat-Controlled Cooling Fans
- 2-Line, 16-Character, Yellow Backlit LCD Data Display. Highly visible in all conditions
- 20 User-definable Memory Positions per port (40 total)
EOS 0615i DUO3 Manual (v3.1 firmware)
EOS 0615i DUO3 Screen Flow Charts (v3.1 firmware)
