Spacer upgrade for the DJI F330 / F450 / F550 utilizing stock DJI motors and Graupner 8x5" props.
When upgrading to Graupner 8x5" props with the DJI system, due to the Graupner props having a slimmer hub thickness, it is difficult to properly tighten down the props with adequate torque, thus preventing prop slippage. When the spacer is added to the underside of the prop at the base of the main motor, this provides the spacing necessary for a tight, slip free fit.
Included: (10) 8x16x1.4mm Zinc Coated Steel Spacers / Washers (Inside Diameter x Outside Diameter x Thickness)
Application: DJI F330 / F450 / F550 Utilizing Graupner 8x5" Props (Note that 8x10" and larger Graupner props have a thicker hub that will not require these spacers).