Description: New design with brass pins and e-rings
	-The Precision Tail Set PRO is an innovative design from MicroHeli in pursuit of zero slop and bind free operation solution for the T-REX. This is the results of months of research and testing from our designers to come up with a great solution for the T-REX tail. With total of 18 precision bearings in the tail system, this is absolutely the best tail system for the T-REX available on the market. It differentiates itselfs from other designs in many ways: 1. The new design hinged type tail pitch slider offers dual support positions on both sides with dual ball bearings connections to ensure total fitness and absolute slop free connections. The tail pitch slider itself also is equipped with double precision bearings to ensure slop free and great smoothness. The brass sleeve in the tail pitch slider is done on highest precision machine with tolerance of +/- 0.001mm so that the tail pitch slider always move truely on the tail shaft. This will ensure absolute slop free in all 3 dimensions. Unlike older version which employs blue plastic horn for connection between the tail pitch slider to the tail rotor, this new design employs new CNC hinged arms to eliminate any possible bind when the tail pitch slider moves to extreme ends on each direction thanks to the new flexible arms. The new arms now no longer uses plastic ball ends to connect to the tail rotor but using two precision miniature bearings for precision control. It is a big improvement over stock design which has plastic ball end connections that can wear out over time. All the bearings we are using in this tail PRO are smallest types of bearings on the market. Over years of bearings selections, we can offer smallest precision bearings for lightest weight and great look. This advantage helps reduce the weight to minimum while maintaning superior performance and great outlook. With a fast look, it's hard to believe they are bearings included. 2. The bell crank in this tail system is a new dual arm design with total 4 precision bearings. This designs offers dual support to the tail pitch slider with ball bearings connections instead of pin connection to get zero slop performance. The bell crank base is also ulitized with double precision flange bearings for super smoothness. We use expensive flange bearings to prevent the chance of bearings falling out of the hub during flights. The most important feature that this new bell crank offers is the ability to allow flexibility between the bell crank and the tail pitch slider via a dual bearing arms which serve as bridges to avoid any possible chances of binding in any extreme movement directions. This innovative design is the only one in the market that offers both hinged tail pitch slider and hinged bell crank. Together they create an excellent system the guarantees zero slop and zero binding in the tail system. 3. The system comes with a new CNC pulley and a precision hardened stainless steel tail shaft. We are the only company that offers hardened stainless steel shaft with extreme tolerance grounded by CNC machines to ensure absolute straightness. The shaft is designed longer than stock shafts so that our bell crank has true 90 degree angle toward the tail boom at zero pitch tail blade position. 4.  The precision tail rotor comes with a new steel hub to eliminate any possible tail rotor hub failure due to high speed of the tail. With new steel tail rotor hub, everyone can feel much more secured flying at any speed. This is very important for the safety of every flyers therefore we decide to incorporate a steel hub in every tail rotor for T-REX. We strongly recommend steel tail rotor hub for your safety. Overall, this tail set PRO provides super smoothness and zero slop, zero binding solution for the tail. It is preassembled at manufacture to ensure all components are working well together and offers extremely easy assembly process. It takes virtually a minute or two to assemble the tail blades and plug the whole system into the tail boom and ready to enjoy the smoothest tail. Only owning this precision system that one can appreciate the performance and the unique look that the system offers.
	Includes:
	-1 x CNC Tail Pulley Case -1 x CNC Tail Pulley -1 x CNC hardened steel tail shaft 3x45mm -1x CNC Dual arm bell crank -1x CNC Tail Pitch Slider -1x CNC Precision Tail Rotor with Steel Hub -Total 18 precision miniature bearings -All hardwares - New design with brass pins and e-rings
	Requires:
	-Loctite (#242 is recommended) -Assembly
	Weight:
	25.4 grams with all hardwares.
	Usage:
	-T-REX 450X/XL/SE helicopters
	Instruction:
	-Included in the package
	Features:
	100% Precision CNC machined Aluminum and Delrin
	Pre-assembly 18 precision miniature bearings
	Dual-arm hinged bell crank to offer smoothness and to ensure zero slop and zero binding
	Dual support hinged tail pitch slider to offer smoothness and to ensure zero slop and zero binding
	Steel tail rotor hub for safety
	Stylish design
Last updated: March 8-2006

Current Reviews: 7

Submited By: russ on 12/31/2009 this tail dive set is beautiful. i,ve crached mine a few times and only bent the 45mm shaft, stock a couple . i have stuffed one of my heli's into a scale fuse and this tail is alot easier to assemble than the stock one. just one more reason to get yourself one of these

Submited By: Ara on 06/07/2009 Microheli does exellent cnc work but uses lesser strong material then align or hdx. Some microheli products are poorly designed and are out of specs. However this tail is avery good piece of work. It is not very bad as it does not get hit as hard as main rotor blades. It is light and very accurately made and looks cool.

Submited By: James on 12/11/2007 They are still making a top quality product as mentioned by the others. Worth every penny.

Submited By: Mike on 08/24/2007 Looks great and works great from new but as someone else said this aluminium is so soft...... mines cracked (2 mild smacks) oh well back to the plastic!

Submited By: Derik on 04/28/2007 Very nice and smooth..no play at all.BUT Don't crash too hard.This is a VERY soft aluminum,Luckily I could get mine welded at our shop.Not even close to the stenght of the align one.

Submited By: Robert Dyer on 02/17/2006 Just received my tail set and WOW this is a number 1 required upgrade for any serious flyer. The accuracy is beyond belief, the smooth running bearings are so precise and there, Nothing out in the market comes close to a well designed product like this. you are looking into upgrading your tail, Then don't fool around and go with the best, you will not be sorry for the few extra $ of your investment once you see the difference. Rob 10 out of 10 as quality and finish

Submited By: martin chorley on 12/27/2005 This i one fantastic piece of work. everything fits and is absolutely beutiful. The extended rotor shaft allows for maximum pitch throws and should really add to 3D capabilities. Even thought the instructions say to disassemble and loctite all the parts, it seemed that in most cases the job had already been done for you!!! Fantastic, beutiful craftsmenship. Even if your not and extreme pilot anyone will enjoy and appreciate the look and quality of this part.

Write Review

Average Customer Rating: Displaying 7 of 7 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion