Free Super Saver Shipping Eligible Learn More

MPA - Multi-Port Safe Parallel Adapter for XH Compatible Battery Packs

4 4
SKU: CP-MPA
You will earn 65 points for buying this product

Availability: In Stock

$64.95
As low as $6.02/mo with Affirm Learn More
Write a review earn 100 points

Description

Details

MPA is a Multi-Port Safe Parallel Module for safely interconnecting same-cell-count LiPo batteries in parallel; also supports RX/TX NiCds. This version supports LiPo batteries with JST XH compatible balance connectors and wiring. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, and other charger brands compatible with JST XH balance connectors and wiring.

Unit includes: support for safe parallel charging of up to 6 same-cell-count packs at one time (2s-8s); supports 40A max charge/discharge rate; every port reverse polarity fuse protection of main battery wires; every cell/balance wire protected by self-resetting polyfuses with temperature warning indicators; supports non-balanced charge of up to two 1s LiPos used with "indoor models"; supports 1 RX and 1 TX NiCd/NiMH battery pack. Works with any Cellpro charger or battery workstation equipped with "XH MODE WIRING" option. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, as well as other brand chargers which are compatible with XH balance plugs and wiring. Be sure to purchase the proper cable to plug the MPA into your Charger or Battery Workstation.

The CP-MPA may be used with both the GT500 and the PL6 or PL8.  You must use a different cable to interface the MPA to the GT series and the PL series chargers.

To connect the CP-MPA to the GT500 requires this cable: MPA-XH-X08 

To connect the PL6 or PL8 to the CP-MPA requires this cable: MPA-FRC-PL6/PL8-US  


Compare Features:

 

 

Features

 

Other Parallel Adapters

 

Revolectrix MPA

 

Number of parallel packs supported

 

6

 

6

 

Cell range supported

 

2s-6s

 

2s-8s

 

Max current supported

 

20-30A

 

40A

 

Reverse polarity fuses on main charge wires

 

NO

 

All packs protected

 

Safety Self-reseting polyfuses Used

 

NO

 

All cells/wires protected

 

Temperature indicators to warn of problems

 

NO

 

All cells/wires protected

 

Supports 1.25mm single cell "indoor" LiPo batteries

 

NO

 

2 in Parallel

 

Supports Receiver NiCd/NiMH battery

 

NO

 

Yes, polyfuse protected

 

Support Transmitter NiCd/NiMH battery

 

NO

 

Yes, polyfuse protected

 

Works with Cellpro products*

 

NO

 

YES

 

Works with other brand chargers**

 

YES

 

YES

 

Multiple units can be daisy-chained

 

NO

 

YES

 

Footnotes:

*MPA can be used with any Cellpro brand products capable of XH WIRING MODE; e.g., Cellpro 10XP, Cellpro PowerLab series. Cables available to support direct connection to these models.

**cables also available to support direct connection to other XH compatible chargers. Cables available from other charger vendors will likely not work with the MPA without modification.