This is a helicopter specific version of NeuMotors 1900 series motors designed for 6S lithium battery fliers such as the TREX 600. The 1900 series motors from NeuMotors are “torque monsters”. The 24 slot 8 pole motors can generate huge amounts of torque in a compact light weight package.

Max RPM: 30,000
RPM/Volt (kV): 1400
Case diameter: 1.96"
Shaft: 5mm
Shaft length: .75"
Length: 2.25"
Resistance (Ohms): 0.009
Idle Current (Io@10v): 1.3
# of slot stators: 24
# of poles rotors: 8
Weight: 285 gram

For more information about this product, please visit http://www.neumotors.com/

Product Support

Technical Questions: Questions about this product should be directed to Neutronics technical support.

Neutronics
11421 West Bernardo Ct
San Diego, CA 92127
Phone # 858-674-2250
Fax # 858-674-2254
tech@neutronics.com
repairs@neutronics.com

Current Reviews: 1

Submited By: Dustin on 07/20/2008 Running this motor on trex 600 with 600mm torsion blades and 12t pinion. using kontronic jazz 80-6-18, lots of power, and getting 4:40 min and that takes about 3700mah out of 5350mah flightpower batteries. For the price, i would rather take this over the align 1700KV 600XL. and a lot more power, had that motor with same set-up and neu performs. Even after 4:40, the motor and esc are only a bit warm to the touch.

Write Review

Average Customer Rating: Displaying 1 of 1 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion