|
Beautiful
precision CNC head system from OUTRAGE RC. This flybarless conversion
kit will convert most 50 size helicopters to flybarless.
The following parts are included:
- Center Hub Set R50N575-1
- Damper Accessories R50N575-2
- Washout Base Set R50N575-3
- Lower Mixing Arms CNC Set R50N575-4
- Main Shaft Set R50N575-5
- Main Blade Grips Set R50N575-6
- Blade Grip Arm Set R50N575-7
- Spindle Shaft Set R50N575-8
- Linkage Rod Set R50N575-9
  
|
The SK360 replaces the mechanical flybar on your R/C Helicopter, which
makes it lighter, fly longer on the same battery charge, and reduces
replacement parts costs. The result is a big step up for scale and
performance models alike. Go flybarless!
SK360 Electronic Flybar setup and review on HELIFREAK
Download Manual
Overview
Throw
out your "1940’s-technology" mechanical flybar and replace it with a
state of the art Digital Flybar. Rock solid hovering with a less
complex, lighter rotorhead for more power or longer flight times!
The SK-360 Digital Flybar is a high performance,
compact and lightweight electronic pitch and roll stabilizer for model
helicopters of all sizes. Its function is to replace the traditional
flybar (stabilizer bar) and its association linkages, boosting power,
increasing flight times and reducing repair costs.
For 3D flying, dial up cyclic rates to the limit of
blade stall, without losing any stability. This gives your heli
lightning-quick 3D, with great performance in wind and a solid hover!
For Scale flying, cyclic rates can be dialed down
for smooth, steady flight even in gusty wind. Both the look and the
sound are more realistic. The SK360 flies great with 2, 3, 4, or 5
blades.
The SK-360 is a compact, single unit, and comes with
a USB interface included. It weighs only 16 grams, and can be mounted
upside-down, backwards, or rotated 90 degrees to fit in any heli.
The PC setup software lets you fully configure the swash mixing, servo motion, and stability.
And, it's easy to upgrade the firmware at home so you'll benefit from
any future product improvements with the click of your mouse. Plus, the
setup software displays the precision PWM inputs and outputs, making it
an excellent calibration tool for your servos and radio.
(Note: For nitro helis, the SK360 has now been tested up to 90 size)
Control Options:
· Adjustable Bell and Hiller ratio (direct vs. stabilized control)
· Adjustable roll (aileron) and pitch (elevator) rates
· Control feel is adjustable in-flight with
optional Bank Switching & gain channel
Swashplate Options:
· Works with Digital or Analog servos
· Suitable for 120, 135/140, and 90 degree eCCPM, as well as mCCPM swashplates
· Swash Ring anti-binding algorithm
· Phase Trim adjustable to +-90°
· Swash servo-equalizing prevents uncommanded collective in aggressive maneuvers
High Performance:
· Synchronous, 12-bit precision (4096 step) PWM inputs from your radio
· Tightly grouped 12-bit servo PWM outputs for low swash motion error
· Super-accurate, crystal driven PWM timing
· Optional 125 Hz Digital servo frame rate
· Minimal lag (just a few milliseconds)
· Individually temperature compensated
· Wide input voltage range (up to 8.5 volts)
· Weight is only 16 grams
Package Contents:
· SK-360 Gyro unit
· Four receiver connection cables
· Four strips of 3M-4408tm mounting tape
· USB Interface with jumper
· USB Extension Cable
· CD with Interface Software
SK360 - Technical Specifications
|
Dimensions:
|
41 x 31 x 15 mm (1.6 x 1.2 x 0.6 in)
|
|
Weight (without cables):
|
16 grams (0.5 oz)
|
|
Operating Temp. Range:
|
-5c to +45c
|
|
Operating Voltage:
|
3.6 to 8.5 VDC
|
|
Power Consumption:
|
28mA
|
|
Wiring Gauge:
|
22 or 24
|
|
Input Signals:
|
3-4 Channels (PWM 700-2300 us)
|
|
Servo Options:
|
Analogue or Digital
|
|
Setup:
|
USB interface, or by Transmitter Sticks
|
|
Field Gain Settings:
|
Bell and Hiller Gain Dials, 0 - 100%
|
|
