SAB Goblin 500 Flybarless Electric Helicopter Red/White Kit

5 8
SKU: SG500
You will earn 649 points for buying this product
-

Availability: In Stock

$649.00
SAB Heli Division

You may also like

Description

Details

http://www.helidirect.com/media/images/upload/31290_1_Untitled-11.jpg

http://www.helidirect.com/media/images/upload/31290_1_page1-500_1-2.jpg

General Specifications Electronic Specifications
 Main rotor diameter:  1136mm (with 500 mm blades)
 HPS Head (FBL Only)
• Main blade length: 470 to 500mm
• Tail rotor diameter: 226 mm
• Tail blade length: 80 mm
• Main shaft diameter: 10 mm
• Tail shaft diameter: 5 mm
• Spindle shaft diameter: 8 mm
• Gear Ratios 6.9-11 : 1
• Weight including electronics: 1900 g (excluding flight battery).
18T motor pulley included (other pulley sizes available)
 
All pulleys are made for 6 mm motor shaft (5 mm motor shaft adapter included in kit)

Special Features:
• Full carbon fiber boom
• Quick release battery tray system
• Sacrificial breaking point for landing gear and boom
 Unique “inside the boom” tail push rod design






• Cyclic Servos: Mini size (36mm)
 
             Normal and 3D Flight: Hitec 5245 MG, Align DS510M or DS515M, Savox SH1250, Graupner DES 678 MG, MKS DS-9660A, Futaba 9650
              HARD 3D: Futaba BLS153, Graupner HBS660 HV, JR DS3717 HV, HITEC 7245 MG HV, JR DS3711 HV

• Tail Servo: Standard size (40mm)

• Typical Speed Controller: 80/100A
              Normal and 3D Flight: Kontronik Koby 90, YGE 100 LV

              HARD 3D: Kontronik Jive 100 LV, YGE 120 LV, CC Edge 100

• Motors: (Max Diameter: 52 mm, Max Height: 52 mm)
              Normal and 3D Flight: Scorpion HK-4015-1070, Quantum 4115-1200

              HARD 3D: PYRO 600-1200, Scorpion, HKIII-4020-1100/1350, Quantum 4120-1200

• Flight Battery: (Max Dimensions: 52x53x180mm)
              6S 2800/4500 mAh.
Kit Includes:
 
18T motor pulley (other pulley sizes available)
• 500 mm main blades 
• 80 mm tail blades

 

The following motor pulleys are available:
15T Pulley (P/N H0215-15-S) Ratio 11:1
17T Pulley (P/N H0215-17-S) Ratio 9.72:1
19T Pulley (P/N H0215-19-S) Ratio 8.7:1
21T Pulley (P/N H0215-21-S) Ratio 7.87:1
23T Pulley (P/N H0215-23-S) Ratio 7.19:1
16T Pulley (P/N 0215-16-S) Ratio 10.33:1
18T Pulley (P/N H0215-18-S) Ratio 9.18:1
20T Pulley (P/N H0215-20-S) Ratio 8.26:1
22T Pulley (P/N H0215-22-S) Ratio 7.51:1
24T Pulley (P/N H0215-24-S) Ratio 6.91:1

    All these motor pulleys are for a 6 mm motor shaft. Each pulley includes an adapter for 5 mm motor shafts.

http://www.helidirect.com/media/images/upload/31290_1_keyfeas.jpg

http://www.helidirect.com/media/images/upload/31290_1_01.jpg
• Identical concept as Goblin 700
• Simple and effective design



• Carbon fiber boom for maximum rigidity



• HPS (High Precision Head System)
• 10mm high strength steel main shaft
• 8mm high strength steel spindle shaft
• Large tail pulleys for increased tail authority
• Dampened tail system for increased vibration tolerance

• Unique, extremely rigid transmission design
• Stiffness of the model defined by a single component
• Heat tolerant primary drive belt
• Carbon fiber tail push rod hidden inside the boom for an aesthetically pleasing, unique design


• Nylon bolt break-away system to preserve the boom during a crash


• Landing gear mounting brackets don’t require bolts to be installed. The brackets are a break point during a crash preserving frames and other important parts
http://www.helidirect.com/media/images/upload/31290_1_09aa.jpg
• Quick release battery tray system


• Plenty of room for electronic components

• Mini size cyclic servos
• Direct and geometrically correct servo placement
• Standard size tail servo


http://www.helidirect.com/media/images/upload/31290_1_gallery.jpg

http://www.helidirect.com/media/images/upload/31290_1_001.jpg http://www.helidirect.com/media/images/upload/31290_1_002.jpg http://www.helidirect.com/media/images/upload/31290_1_003.jpg
http://www.helidirect.com/media/images/upload/31290_1_004.jpg http://www.helidirect.com/media/images/upload/31290_1_006.jpg http://www.helidirect.com/media/images/upload/31290_1_007.jpg
http://www.helidirect.com/media/images/upload/31290_1_008.jpg http://www.helidirect.com/media/images/upload/31290_1_009.jpg http://www.helidirect.com/media/images/upload/31290_1_010.jpg
http://www.helidirect.com/media/images/upload/31290_1_011.jpg http://www.helidirect.com/media/images/upload/31290_1_012.jpg http://www.helidirect.com/media/images/upload/31290_1_013.jpg

http://www.helidirect.com/media/images/upload/31290_1_bertin.jpg

http://www.helidirect.com/media/images/upload/31290_1_review.jpg

"For the past year I’ve owned a SAB Goblin 700. It has been my favorite heli to date. The reasons are many, but include aesthetics, feel, agility, speed, design and maintenance. This left me with a desire to capture that in a smaller model when I first heard that SAB was going to release a little Goblin. At IRCHA last year I was able to finally get my hands on one. I was immediately impressed with the design layout and watching the pros fly the 500 just made me hunger for one even more..."

Kevin Morris

 

 

Disclaimer: SAB Heli Division does not endorse any of the electronic components listed. These are only suggestions based on our own testing. Please make sure to do your own research to ensure compatibility between these components, specially between motors and ESCs.

Specifications

Additional Info

Completion Level No

Parts & Accessories

  • Goblin 500 Optional Accessories
  • Goblin 500 Standard Parts
  • Goblin 500 Upgrade Parts