Free Super Saver Shipping Eligible Learn More

SAB Goblin 570 Helicopter Grey/White Kit

5 4
SKU: SG571
You will earn 698 points for buying this product

Availability: In Stock

As low as $64.66/mo with Affirm Learn More
Write a review earn 100 points




Now includes:

1- Goblin 570 Swash Plate Set V2 -

This new swash plate Set has a new design, which can pop out the main blade link rods in crash easier than the old version, which may save your servo (and its gears).

2-  Goblin 570 CNC Delrin Main Gear - H0423-S

This new CNC delrin main gear  is stronger and make your transmission smoother!

Goblin 570 Maiden Flight by Kyle Stacy



Instruction Manual

General Specifications
Electronic Specifications
• Main rotor diameter:  1278 mm (with 570 mm blades)
 FBL System
• Main blade length:550 to 575mm
• Tail rotor diameter: 260 mm
• Tail blade length: 95 mm
• Main shaft diameter: 10 mm
• Spindle shaft diameter: 8 mm
• Weight including electronics: 2400 g (excluding batteries).
Special Features:
• Full carbon boom
• Battery tray 6S and 12S
 Inside carbon rod
 Dampened tail system

• Cyclic Servos: Standards size 40mm
• Tail Servo: Standard size (40mm)

• Typical Speed Controller: 
  • 6S 100A
  • 12S 80A
• Maximum motor size: 4025 size (52 mm diameter, 56 mm height)
  • 6S 1000-1400 Kv 
  • 12S 500-700 Kv
12S 500-700 Kv
• Battery compartment: 
  • 6S 5000/5500 mAh.   Max dimension 50x60x200mm
  • 12S 2600/3300 mAh.  Max dimension  50x45x280mm
Kit Includes:
• 21T motor pulley (other pulley sizes available)
• 1 battery tray with straps
• 570 mm main blades
• 95 mm tail blades
The following motor pulleys are available:

H0215-16-S-16T Pinion = ratio 12.9:1

H0215-17-S-17T Pinion = ratio 12.2:1

H0215-18-S-18T Pinion = ratio 11.5:1

H0215-19-S-19T Pinion = ratio 10.9:1


H0215-20-S-20T Pinion = ratio 10.3:1

H0215-21-S-21T Pinion = ratio 9.8:1

H0215-22-S-22T Pinion = ratio 9.4:1

H0215-23-S-23T Pinion = ratio 9:1

H0215-24-S-24T Pinion = ratio 8.5:1

    All these motor pulleys are for a 6 mm motor shaft. Each pulley includes an adapter for 5 mm motor shafts.

• HPS (High Precision Head System)
• 10mm high strength steel main shaft
• 8mm high strength steel spindle shaft

• 2mm carbon frames.

• Stronger main gear, Gates GT3 motor belts, 10 mm one-way bearing
• Strong landing gear. Landing gear mounting brackets do not require bolts to be installed. The brackets are a break point during a crash preserving frames and other important parts
• Aluminum tail case for increased stiffness.
• Dampened tail system for increased vibration tolerance
• 6S and 12 S battery

• Battery tray with lock system.

• Nylon bolt break-away system to preserve the boom during a crash

• Aluminum ESC support

• Standard size cycling servos

• Standard size tail servo
• Canopy saver, protects the canopy edges from scuffing.


Additional Info

Now on sales N/A
Kit Type Electric
Helicopter Sizes 550-size

Parts & Accessories