SAB Goblin 570 Helicopter Red/Yellow Kit - With New CNC Main Gear & New Swashplate

SKU: SG570
You will earn 698 points for buying this product

Availability: In Stock

As low as $64.66/mo with Affirm Learn More
SAB Heli Division

You may also like




Now includes:

1- Goblin 570 Swash Plate Set V2 -

This new swash plate Set has a new design, which can pop out the main blade link rods in crash easier than the old version, which may save your servo (and its gears).

2-  Goblin 570 CNC Delrin Main Gear - H0423-S

This new CNC delrin main gear  is stronger and make your transmission smoother!

Goblin 570 Maiden Flight by Kyle Stacy


Goblin 570 Maiden Flight by Kyle Stacy


View on YouTube

 Instruction Manual

General Specifications
Electronic Specifications
• Main rotor diameter:  1278 mm (with 570 mm blades)
 FBL System
• Main blade length:550 to 575mm
• Tail rotor diameter: 260 mm
• Tail blade length: 95 mm
• Main shaft diameter: 10 mm
• Spindle shaft diameter: 8 mm
• Weight including electronics: 2400 g (excluding batteries).
Special Features:
• Full carbon boom
• Battery tray 6S and 12S
 Inside carbon rod
 Dampened tail system

• Cyclic Servos: Standards size 40mm
• Tail Servo: Standard size (40mm)

• Typical Speed Controller: 
  • 6S 100A
  • 12S 80A
• Maximum motor size: 4025 size (52 mm diameter, 56 mm height)
  • 6S 1000-1400 Kv 
  • 12S 500-700 Kv
12S 500-700 Kv
• Battery compartment: 
  • 6S 5000/5500 mAh.   Max dimension 50x60x200mm
  • 12S 2600/3300 mAh.  Max dimension  50x45x280mm
Kit Includes:
• 21T motor pulley (other pulley sizes available)
• 1 battery tray with straps
• 570 mm main blades
• 95 mm tail blades
The following motor pulleys are available:

H0215-16-S-16T Pinion = ratio 12.9:1

H0215-17-S-17T Pinion = ratio 12.2:1

H0215-18-S-18T Pinion = ratio 11.5:1

H0215-19-S-19T Pinion = ratio 10.9:1


H0215-20-S-20T Pinion = ratio 10.3:1

H0215-21-S-21T Pinion = ratio 9.8:1

H0215-22-S-22T Pinion = ratio 9.4:1

H0215-23-S-23T Pinion = ratio 9:1

H0215-24-S-24T Pinion = ratio 8.5:1

    All these motor pulleys are for a 6 mm motor shaft. Each pulley includes an adapter for 5 mm motor shafts.

• HPS (High Precision Head System)
• 10mm high strength steel main shaft
• 8mm high strength steel spindle shaft

• 2mm carbon frames.

• Stronger main gear, Gates GT3 motor belts, 10 mm one-way bearing
• Strong landing gear. Landing gear mounting brackets do not require bolts to be installed. The brackets are a break point during a crash preserving frames and other important parts
• Aluminum tail case for increased stiffness.
• Dampened tail system for increased vibration tolerance
• 6S and 12 S battery

• Battery tray with lock system.

• Nylon bolt break-away system to preserve the boom during a crash

• Aluminum ESC support

• Standard size cycling servos

• Standard size tail servo
• Canopy saver, protects the canopy edges from scuffing.

Parts & Accessories

Review Videos

Video Testimonials & Reviews