Product Details
IMPORTANT INFORMATION REGARDING BEC's BUILT INTO ESC's - click here to view
The Scorpion Switching BEC Series Brushless Speed Controllers represent
one of the best values in the speed controller market today. From the
beautiful gold anodized heatsinks, to the unique metal containers that
the ESC's are shipped in, everything about Scorpion Speed Controllers
shows the company's commitment to quality. These ESC's are manufactured
from top quality components, in a state of the art manufacturing
facility, and are designed to provide years of trouble free operation.
Each Scorpion 6-cell Speed Controller includes a built-in Switching
Style BEC circuit. This BEC provides a regulated output of 5.7 volts,
and can deliver 3 amps of continuous current with 4 amp bursts. With a
Switching type BEC, you do not need to de-rate the BEC as the input
voltage increases. The full 3 amps of BEC current is available for any
input between 2-cell and 6-cell Li-Po operation.
These new 6-cell Speed Controllers also offer a unique wireless
programming system that is a first in the RC Model Industry. Unlike
other ESC manufacturers, who require you to buy an add-on programming
module to gain full functionality of the controller, Scorpion provides
a full feature Programming Card with EVERY speed controller sold, at No
Extra Charge!
The new wireless programming system consists of a postage stamp size IR
receiver module that mounts in your model, and a credit card sized IR
Transmitter that easily fits in your pocket or toolbox. The IR receiver
plugs into the throttle channel of your radio receiver, and then the
Speed Controller plugs into the IR Receiver board. To program the ESC,
you simply flip the switch on the IR Receiver board to the program
position, point the transmitter at the IR receiver board, type in the
parameter you want to adjust and hit the Enter button. The IR board
will give you a flashing light and a motor tone to acknowledge the
command. Once you are finished programming, you simply flip the switch
on the IR Receiver board to the Run position. This will re-boot the ESC
and enter the new program into memory. After this is complete, you can
fly your aircraft.
Programming your ESC has never been easier! There is no need to dig the
receiver out of the plane, No need to unplug any cables, and no more
dragging a laptop computer to the flying field! Programming your ESC is
as easy as changing channels on your TV!
The adjustable parameters on the Scorpion 6-cell ESC's include many
extra options not found on other controllers. These options include:
Low Voltage Cutoff: Adjustable from 5.0 to 25.0 volts in 0.5 volt increments
Brake Setting: Adjustable in 5 steps from No Brake to Very Hard Brake
LVC Cut-off Type: 50% power, Pulsed Output and No cut-off are available
Motor Acceleration Delay: Slows motor response for use with gear box motors. Adjustable in 5 steps from 0.15 to 1.3 Seconds
Current Overload Protection: Can be turned on or off to suit your preference
PWM Frequency: Adjustable to 8KHz, 16 Khz, or 32 Khz
Soft Start Mode: Slows down motor spool-up for Helicopter use
Motor Rotation: Adjustable to normal or reverse rotation
Motor Timing: 6 options available, Auto Detect, 5°, 15°, 20°, 25°, and 30°
Governor Mode: For Helicopter use, 5 settings are available 50%, 60%, 70%, 80% and 90% throttle
Starter Boost: For starting very High Kv motors that can be difficult to start
Scorpion Speed Controllers also include all of the ESC parameters
clearly labeled on the heatsink assembly. Voltage range, current
rating, BEC rating, and input polarity are all clearly marked to avoid
any confusion. Scorpion 6-cell Switching BEC Series Speed Controllers
are also backed by a 2 year manufacturers warranty against defects in
materials and workmanship, so you can buy with confidence. For a total
package of Quality, Performance and Value, use Scorpion Brushless Speed
Controllers.
Specifications
Weight (Without Connectors) ................. 73 gm (2.57 oz)
Max Continuous Current ..................................... 120 Amps
Operating Voltage Range ............................... 5 to 26 Volts
On Resistance ................................................ 2.33 mOhms
Max BEC Output ...................................... 4 Amps @ 5.7 V
Size ....................... 88 x 30 x 14 mm (3.46 x 1.18 x 0.55 in)
