You may also like
Starting At: $460.00
Starting At: $337.49
The Goblin 380 provides incredible performance, reliability and simplicity with the unique and innovative Goblin look you are accustomed to!
- Main rotor diameter: 856 mm
- Main blade length: 380mm
- Tail rotor diameter: 196 mm
- Tail blade length: 70 mm
- Main shaft diameter: 8 mm
- Tail shaft diameter: 5 mm
- Weight including electronics: 1075 g (excluding batteries).
- 21T motor pulley (other motor pulleys available)
- BL 380 3D mm main blades
- 70 mm tail blades
- 2x Battery tray with straps and double tape
- Cyclic Servos: Micro size 23mm
- General and 3D flight: MKS DS92A+, Savox SH-0255MG
- General and Extreme flight: BK 3001HV, SAVOX SV-1232MG, MKS HV93, MKS DS95
- Tail Servo: Mini size 35 mm
- General and 3D flight: Savox SH-1257MG, Futaba S9257
- General and Extreme flight: BK 5005HV, MKS HV9780
- Typical speed controller:
- General and 3D flight: Kontronik Koby 70, YGE 60 LV, CC Lite 75
- General and Extreme flight: Kontronik Koby 90 - Jive 80LV , YGE 90 LV, CC Lite 100
- Maximum motor size: 41 mm diameter, 41 mm height
- General and 3D flight: X-Nova 2820-890, Scorpion HK 3014-900, Quantum 2820-880
- General and Extreme flight:
- Kontronik Pyro 380-9, X-Nova 3215-930,
- Scorpion HK 3020-1000, KDE 500XF-950.
- Battery compartment: 44x44x130mm
- 6S 1500/2600 mAh. For perfect 3D flight 6S-1800 mAhThe following motor pulleys are available:
- H0501-19-S - 19T Pinion = ratio 6.3:1
- H0501-20-S - 20T Pinion = ratio 6:1
- H0501-21-S - 21T Pinion = ratio 5.7:1
- H0501-22-S - 22T Pinion = ratio 5.5:1
- H0501-23-S - 23T Pinion = ratio 5.2:1
- H0501-24-S - 24T Pinion = ratio 5:1wing motor pulleys are available:
All these motor pulleys are for a 6 mm motor shaft. Each pulley includes an adapter for 5 mm motor shafts.
Goblin Concept design.
Single stage transmission;
Heat tolerant primary drive belt;
Motor Belt Gates GT3 9 mm.
HPS (High Precision Head System);
8mm high strength steel main shaft;
5mm high strength steel spindle shaft;
New head with 2-piece blade grip preserves grips in the event of a crash.
Direct and geometrically correct servo placement;
Mini size cyclic servos.
Quick release battery tray system
Big battery compartment;
Wide selection of batteries with different capacities 6S 1500/2600 mAh.
Mini size tail servo.
Aluminum Motor mount.
Plenty of room for electronic components.
Very clean Cabling.
Dampened tail system for increased vibration tolerance;
Aluminum tail case for increased stiffness.
5mm high strength Tail shaft
Carbon fiber tail push rod hidden inside the boom for an aesthetically pleasing, unique design.
|Now on sales||N/A|