Product Details
Instruction Manual
Thunder Power RC has released the TP610C, their newest LiPo, A123, NiCd/MH and PB battery charger. The TP 610C charger can charge 1 to 6 LiPo and A123 cells, 1-14 NiCd and NiMH cells, and 6-12V Pb (Lead Acid) batteries. The Thunder Power TP-610C can charge, balance, discharge and cycle batteries and report back full data. The TP610 charger is capable of up to 10 amps (80 watts total) when charging. Using the TP 610 charger to cycle your battery packs will improve their performance, and the TP-610 charger's built-in balancer will extend the life of your lithium packs!
Includes
- TP610C Charger
- Alligator clip power supply leads (attached, see picture)
- BL-2 Connector (Balancer multi-adapter. Thunder Power and generic balance adapter plugs)
TP-610C Balance Charger Specifications
- Max Charge Rate: 10A
- LiPo and A123 Cells: 1-6
- NiCd and NiMH Cells: 1-14
- PB Batteries: 6-12V
- Power supply sold separately
- Recommended Power supply: 12V car battery or 11-16V DC power supply capable of supplying 10 Amps (example: RipMax Pro-Peak)
TP-610C Balance Charger Features
- Chargers LiPo, A123, NiCD, NiMH, PB
- Discharges
- Balances
- Cycles
Thunder Power TP-610C Charger Technical Specifications
- Input Power: 11-16V DC 10Amp at maximum charge rate
- Memory profile: 25Memory for each Battery type
- Charge battery type: LiPoly/NiMH/NiCd/Pb/A123
- Charge voltage and cells:
- LiPoly battery: 1 - 6 cells
- CC to CV change voltage: 4.1BV/cell
- Full Charge Voltage 4.2 V/Cell
- NiMh, NiCd Battery: 1 - 14 cells
- Pb(SLA) battery: 6V/12V/24V
- A123 Battery: 1 - 6 cells
- CC to CV change voltage: 3.0V /Cell
- Full charge voltage: 3.65 V/Cell
- Charge Current: 0.2.5 A, 10A
- Charge control type Lipoly/Al23:CC/CV
- Charge NiCd/NiMH: constant current - delta peak
- Charge/discharge cycles: 9 cycles
- Discharge rate: 50mA - 1 Amp
- Discharge capacity: 7 Watt (Max 1A)
- Capacity display: O-9999mAh
- Timeout limit: 2-10 hour (User selectable)
- Display Tolerance: 0.5%
- Display Type: Backlit 2 x 16 dot LCD
- Charge maximum output 80 Watt
- Output Charge Terminal: 4mm standard banana jack
- Input wire: 16 AWG silicon Wire with attached alligator clips
- Size: 118 x 85 x 28 mm (4.65 x 3.4 x 1.1 in)
- Weight: 205g (9.4oz)
Buy this and one of these related products...
Buy this and one of these related products...
Buy this and one of these related products...
Buy this and one of these related products...
