NOTE:  Recommend running this motor ONLY on 2S setups, the KV is too high to run a 3S setup with this motor and will result in damage to motor and/or ESC.

 

Tonic-X EP200 Series is special design for GAUI EP100/200 micro helicopter. Usually, the rpm of 300 size out-runner brushless motor set around 1000~1500 (DD) or 2800~3500 (Gearbox). There are no any high KV motor are well match GAUI EP100/200. The motor included in EP100/200 is 4700 KV motor. The rpm still a little bit not enough for 3D flying.
Now, the new type 300 size motor is special design for GAUI EP100/200 that is from the famous Z-Power Motor Co in Taiwan. The performance is quality continuous other series.

Specification:

• KV: 5150
• Weight: 25.5 grams
• Shaft Diameter: 2.3mm
• Size: 25.6mm x 18.5mm
• Mount holes: standard 16 & 19
• Max Current: 19A

Check out Related products

Add This Item

KX880003A

Align 15A Brushless ESC(Governer Mode) RCE-BL15X

$38.99

Add This Item

PHX-10M

CASTLE CREATIONS PHOENIX 10 MICRO SPEED CONTROL

$54.95

Add This Item

Pentium-12A

HobbyWing Pentium Brushless ESC 12A

$24.95

Current Reviews: 2

Submited By: Ray on 10/19/2009 We have been running this motor on both 2S and 3S for over 2 years. No problems!

Submited By: Rob on 11/13/2008 This motor burned out on 3s. On 2s there is power to spare in the Gaui200

Write Review

Average Customer Rating: Displaying 2 of 2 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion