Features:
TOWERPRO SG-90 9g Micro Servo

Coreless Motor
All Nylon Gear
Connector Wire Length 150MM

Specifications:
*Dimensions: 22 x 11.5 x 27mm
*Operating Speed (4.8V no load): 0.12sec/60 degrees
*Stall Torque (4.8V): 17.5oz/in (1.2 kg/cm)
*Temperature Range: -30 to +60 Degree C
*Dead Band Width: 7microsec
*Operating Voltage:3.0-7.2 Volts

 

Add This Item

SER-01G

TowerPro Nylon Gear for SER-01 Servo

$1.50

Current Reviews: 9

Submited By: bryan on 02/02/2010 CRAP CRAP CRAP VERY VERY BRITTLE

Submited By: joe on 08/29/2009 I like these servos alot but the cases crack way too easy. The cases get spider cracks in them and then they become weak around the mounting tabs. I had to change out my servo horns for longer ones and found that two out of three servos, the mounting tabs feel aparts. And no it's not from over tightening them, I know better. Time to try something else or even upgrade to Digital servos.

Submited By: bryan on 05/14/2009 i love this servo

Submited By: John on 10/19/2008 I have four on my belt cp and they all work perfectly. They also survived a totaling crash on my walkera 36 and have over 25 flights in.

Submited By: Tim on 09/27/2008 Best servo for the money. Run these in planes and Blade 400.

Submited By: Marcin on 09/09/2008 Great servo for great price. I use 3 of these on my Belt CP. The swash plate moves further and more confidently, and I started getting into flips with the confidence these servos gave me. More durable than the stock Esky servos too. Two thumbs up from this flier.

Submited By: Mehis on 07/24/2008 These are great little servos at very low price. I use them on most of my small planes and all 450 size helis. They are more robust than Hitech HS55, have stronger and longer horns. The generally work well and take a fair amount of abuse (you may occasionally get a bad one, but that should be apparent from the start and they don't seem to fail while in use)

Submited By: Jorge on 02/16/2007 Great performance & value! Have them installed on my TREX, MX400 & Dragonus Intruder. Never stripped a gear, believe me; I had my fare share of crashes. Plenty of torque in a CCPM setup, loops, rolls & backflips without any issues. Can't praise them enough!!

Submited By: Erik on 11/22/2006 So far so good, these are mounted in my shogun400, they are just slightly larger than what the shogun was designed for but still fit well. They seem very tough. The servo arms that come with them are a decent length too so you could easily use them in a small 3d plane if you wanted to.

Write Review

Average Customer Rating: Displaying 9 of 9 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion