|
Click on Image to Enlarge
|
|
Tail Servo Step-Down Voltage is
|
| ideally designed to step-down a |
| voltage source of 6 volts that is |
| outputted from any external BEC |
| (battery eliminator circuit) down to |
| 5.2 volts. This allows an external |
| 6 volt BEC to be used with Futaba |
| servo models 9241. 9251. 9253. 9254. |
| 9255. 9256 and other digital servos that |
| are not capable of handling 6 volts. |
| The Tail Servo Step-Down Voltage is |
| equipped with male/female servo |
| plugs and is ideally used in series |
| with the RC model’s gyro and rudder |
| servo to prevent any harmful damage |
| or overloading to your servo. The |
| Tail Servo Step-Down Voltage can also |
| be used with any other applications |
| that require a step down power voltage of approximately 0.8 volts. |
| |
|
|
SPECIFICATIONS:
|
FEATURES: |
|
Height ----- 4 mm
|
l |
Ultra compact step-down voltage |
| Width ----- 8 mm |
|
regulator cable to reduce 6V source |
| Length ----- 12 mm |
|
to a safe 5.2V to the rudder servo. |
| Weight ----- 4 grams |
l |
High power component to withstand |
| |
|
current of up to 5 Amps continuous, |
|
|
|
10 Amps peak at 50V. |
|
|
l |
Prevents harmful damage and |
| |
overloading to the digital rudder/tail |
| |
servo. |
| l |
Easy installation. |
| |
l |
Optional LED indicator version |
|
