Login or create an account to earn points.

Align T-Rex 500X Dominator Super Combo Helicopter with DS530/DS535 Servos

SKU: RH50E18XW
You will earn 637 points for buying this product

Availability: In Stock

$637.49
As low as$59.05/mo with Affirm Learn More
Write a review earn 100 points

Description

Flight video:

Experienced in numerous of innovations, the brand new T-REX 500X is now ready to go. More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500X model ever.

Refresh and refine, T-REX 500X adapt with brand new FL rotor head system, utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to improve crashworthiness.

T-REX 500X utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V providing efficient and superior power. The NEW DS530M/DS535M digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.

Equipped with all the top end electronic devices, T-REX 500X is as stable and powerful like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.

Focus Shots

New extended 470mm main blades for T-REX 500X effectively improve the flying stability and power performance. Enhance the power for better control allow to enjoy T-REX 500X flights same like other large size helicopters. New 78 size tail blades are longer in length and offer superior and precise tail holding performance, even during demanding 3D flight.

The brand new low CG 500FL Flybarless Rotor Head System utilizes the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity. Allow to reduce resistance during 3D maneuvers, increased flight responsiveness and precision. In addition, the styling appearance harmony with red anodized and stainless color, bring out the high quality just like 700 size 3D helicopter.

 

New Swashplate design with precise bearings features in zero slop delivering a precise and accurate controlled flight.

New 520MX(1600KV/3527) motor features high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. Allow to provide maintaining consistent torque and head speed through continuous 3D maneuvers.

 

Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure. In addition, the styling appearance harmony with red anodized and stainless color bring out the high tactile appeal.
Carbon fiber side frame plates are manufactured using a proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.

An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

 

RCE-BL80X is specially designed for T-REX 500X providing higher currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.

Brand new latching battery tray which utilizes integrated mounting rails inside the frames to simplify insertion / removal of battery while providing protection for the battery.

 

DS530 HV Cyclic and DS535 HV Rudder servos support up to 8.4V for superior responsiveness, extreme torque, and improved performance.

Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time. Brand New Belt Drive Assembly design allow for quiet operation and low cost on serviceability.

 

Ultilize of strengthen main gear case features in using larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the fficiency, speed, and smoothness of the main rotor. The new main gear case and all-metal central pulley transmission system is an efficient design to deliver the ultimate performance.

Landing skid is tilted 5 degrees forward to improve crashworthiness.

 

A 19mm wide Tail Boom to improves the torsional strength. Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder resolution and precision.

 

The new tail rotor holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of the tail performance when using 78 size Tail Blades.

 

Standard equipment

Microbeast PLUS Flybarless System x 1 set
RCE-BL80X Brushless ESC x 1
520MX Brushless Motor(1600KV/3527) x 1
DS530 Digital servo x 3
DS535 Digital servo x 1

Specification

Length: 935mm
Height: 259mm
Width: 151mm
Main Blade Length: 470mm
Main Rotor Diameter: 1054mm
Tail Rotor Diameter: 219mm
Motor Pinion Gear: 12T
Main Drive Gear: 134T
Main Drive Pulley: 80T
Tail Drive Gear: 21T
Drive Gear Ratio: 11.17:1:3.81
Weight(w/o battery): approx. 1400g

Accessories

T-REX 500X KIT Set x 1
Microbeast PLUS Flybarless System x 1 set
470 Carbon Fiber Blades x 1
78 Tail Rotor Blade x 1
520MX Brushless Motor(1600KV/3527) x 1
DS530 Digital servo x 3
DS535 Digital servo x 1
RCE-BL80X Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 2600 ~ 3300mAh (3300mAh suggestion)
Digital Pitch Gauge

Warranty, Returns & Support

Warranty Information

We truly thank you for your purchase, and when things go wrong, we are here to help in any way that we are capable of doing so.

In regards to any warranty related matter, please reference the below information to help understand our warranty policies, as these warranty policies are absolute when it comes to any purchase made via HeliDirect.

Warranty Time Frame

Regarding product(s) purchased via HeliDirect, each manufacturer has their own specified warranty time frame, and HeliDirect holds the sole right to direct the customer to the manufacturer for stated warranty support in regards to manufacturer's that require direct level warranty support.

Our stated (14) day return policy directly relates to brand new, unused products being returned for a refund or store credit, and does not relate to warranty related situations for faulty product(s). Faulty, damaged or problematic items are handled upon a case by case basis, and will be detailed below based upon the warranty options available.

Our team at HeliDirect is highly motivated to assist in every possible way regarding warranty support, but please be 100% aware that warranty support for the product(s) you have purchased may be handled directly via the manufacturer, and not through HeliDirect.

If your product(s) involve direct manufacturer support, we are still available to assist. We ask that the customer make the initial manufacturer contact for warranty support, but in the case where a manufacturer response is not receive within (5) business days, HeliDirect will step in upon your behalf, utilizing our channels to assist you with this manufacturer based support.

In the above case, HeliDirect will do everything in our power to make sure the manufacturer assists you directly, but please note that all such warranty in regards to an issue like this will still be directed through the manufacturer.

Warranty Related Issues

Please note that HeliDirect is not a warranty repair center, nor do we offer warranty regarding many items we resell. Product(s) purchased via HeliDirect are subject to the original vendor’s repair / replacement warranty policies & timelines, and will be directed to the manufacturer at our discretion.

HeliDirect will not assume responsibility and / or liability for any manufacturer defect, or damage due the use / misuse of the product(s) purchased. Further, HeliDirect cannot / will not be held liable for ancillary damage to product(s) based upon a manufacturer fault or defect. All such issues will be dealt with at the manufacturer based level.

If your item is found to have a fault or defect after installation or use, your product may be subject to warranty repair via the original manufacturer, no matter what the purchase date may be. HeliDirect does not cover repair, replacement or warranty via used / installed products. All such issues will need to be dealt with at the manufacturer level.

Damage Due to Ancillary Product Failure

In regards to damage that directly results to a failed product installed in conjunction with another product, we are happy to assist in terms of warranty support for the product that has failed, but please be aware that we cannot be held liable for ancillary damage to other items or components that may have been damaged due to the original product failure.

Warranty Returns

If your product is approved by our customer service staff as a valid return that we will handle directly, please note the below information regarding all such approved warranty items sent to HeliDirect.

- Any item(s) approved for return to HeliDirect will be subject to inspection and or testing to verify the noted information provided by the customer regarding the flaws, faults or damage.

- Due to the various aspects of testing, repair and other return processes, please be aware that any such approved return will require (2) to (5) business days for proper processing. Our staff will certainly do all that we can to reduce this time to the bare minimum, but please be aware that the return process can take up to (5) business days to complete.

- If the product(s) approved for return are deemed faulty by our returns specialists, we will proceed with a repair, exchange, credit or refund based upon the situation at hand. All such information will be communicated to the customer before any re-shipment is made.

- If an item that encounters a warranty issue after usage, HeliDirect may opt to repair the product versus an exchange, as exchanges can only be made for valid warranty relating to products that have no use of flaws. Our staff will be sure item is in 100% working order based upon any repairs, but exchanges, credits or refund cannot be offered for items under warranty that have been used and are no longer able to be sold as new.

- In the case of product(s) returned to us that test to be non faulty, the product(s) will be returned to the customer in the condition received. Our staff will reach out to the customer with necessary information regarding what may have been missed, and what steps to take in order to utilize the product(s) effectively.

- For non faulty diagnoses of returned product(s), refunds, store credits or exchanges cannot be offered, as the product(s) received cannot be sold as new and unused.

Spare & Accessories

  1. In Stock Align 500 Metal Tail Pitch Assembly
    -
  2. In Stock Align 500L Battery Mount
    -
  3. In Stock Align 500L Gyro Mount
    -
  4. In Stock Align 500X Aluminum Hexagonal Bolt
    -
  5. In Stock Align 500X Belt Pulley Assembly Align 500X Belt Pulley Assembly
    -
  6. In Stock Align 500X Bottom Plate
    -
  7. In Stock Align 500X Brushless ESC Mounting Plate Set
    -
  8. In Stock Align 500X Canopy Mounting Bolt
    -
  9. In Stock Align 500X Carbon Fiber Tail Linkage Rod
    -
  10. In Stock Align 500X Carbon Fiber Vertical Stabilizer
    -
  11. In Stock Align 500X Carbon Main Frame (R)
    -
  12. In Stock Align 500X Carbon Main Frame(L)
    -
  13. In Stock Align 500X CCPM Metal Swashplate
    -
  14. In Stock Align 500X Drive Gear Mount
    -
  15. In Stock Align 500X Frame mounting Block
    -
  16. In Stock Align 500X Landing Skid
    -
  17. In Stock Align 500X Linkage Ball Set
    -
  18. In Stock Align 500X Linkage Rod Set
    -
  19. In Stock Align 500X Main Blade Holder
    -
  20. In Stock Align 500X Main Gear Case Set
    -
  21. In Stock Align 500X Main Rotor Holder
    -
  22. In Stock Align 500X Main Shaft
    -
  23. In Stock Align 500X Metal Control Arm Set
    -
  24. In Stock Align 500X Metal Main Shaft Bearing Block
    -
  25. In Stock Align 500X Motor Mount
    -
  26. In Stock Align 500X One-way Bearing Shaft
    -
  27. In Stock Align 500X Painted Canopy
    -
  28. In Stock Align 500X Rotor Housing
    -
  29. In Stock Align 500X Stabilizer Belt Set
    -
  30. In Stock Align 500X Stabilizer Mount
    -
  31. In Stock Align 500X Tail Belt Unit
    -
  32. In Stock Align 500X Tail Boom
    -
  33. In Stock Align 500X Tail Boom Mount
    -
  34. In Stock Align 500X Tail Drive Belt Pulley Assembly
    -
  35. In Stock Align 500X Tail Rotor Holder
    -
  36. In Stock Align 500X Tail Rotor Hub Set
    -
  37. In Stock Align 500X The 3rd Metal Bearing Block Set
    -
  38. In Stock Align Bearing (684ZZ) - 4x9x4mm Bearings
    -
  39. In Stock Align Bearing (MR126ZZ) - 6x12x4mm Bearings
    -
  40. In Stock Align M2.5 Special Washer - Red
    -
  41. In Stock Align M2.5 Special Washer - Silver
    -
  42. In Stock-16% Align RCE-BL80A Brushless ESC
    -
  43. In Stock Align T-Rex 500L Motor Slant Thread Pinion Gear 12T
  44. In Stock Align T-REX250-500 Hardware Bag
    -
  45. In Stock Align Trex 500 Canopy Nut - Complete Trex 500 Series
  46. In Stock PULSE 3000mAh 6S 22.2V 45C - LiPo Battery

    * True 5C Charge Rates
    * Myriads of Voltages, Capacities & C Ratings
    * 15C / 25C / 35C / 45C / 65C Layouts for High Power Demands
    * Large Multi Rotor Packs Suited Specifically for Multi Rotor Demands
    * Multiple Airplane Battery Applications Available
    * Transmitter & Receiver Pack Options
    * Large AWG Wiring for Maximum Power Applications
    * Industry Standard JST/XH Balance Taps
    * 90 Day Manufacturer Warranty from Point of Customer Purchase

    Specifications:

    • Voltage: 22.2V
    • Cell Count: 6S
    • Capacity: 3000mAh
    • Discharge Rate: 45C
    • Charge Rate: 5C
    • Dimensions: 139±2mm x 43.5±1mm x 41.5±1mm (LxWxH)
    • Weight: 492g
    • Balance Tap: JST-XH

  47. Pre-Order PULSE 3000mAh 6S 22.2V 65C - LiPo Battery PULSE 3000mAh 6S 22.2V 65C - LiPo Battery

    For 500-size helicopter like T-Rex 500 DFC, T-Rex 500L, Protos 500...

    * True 5C Charge Rates
    * Myriads of Voltages, Capacities & C Ratings
    * 15C / 25C / 35C / 45C / 65C Layouts for High Power Demands
    * Large Multi Rotor Packs Suited Specifically for Multi Rotor Demands
    * Multiple Airplane Battery Applications Available
    * Transmitter & Receiver Pack Options
    * Large AWG Wiring for Maximum Power Applications
    * Industry Standard JST/XH Balance Taps
    * 90 Day Manufacturer Warranty from Point of Customer Purchase

    Specifications:

    • Voltage: 22.2V
    • Cell Count: 6S
    • Capacity: 3000mAh
    • Discharge Rate: 65C
    • Charge Rate: 5C
    • Dimensions: 139±2mm x 43.5±1mm x 41±1mm (LxWxH)
    • Weight: 483g
    • Balance Tap: JST-XH
  48. In Stock PULSE 3300mAh 6S 22.2V 45C - LiPo Battery

    * True 5C Charge Rates
    * Myriads of Voltages, Capacities & C Ratings
    * 15C / 25C / 35C / 45C / 65C Layouts for High Power Demands
    * Large Multi Rotor Packs Suited Specifically for Multi Rotor Demands
    * Multiple Airplane Battery Applications Available
    * Transmitter & Receiver Pack Options
    * Large AWG Wiring for Maximum Power Applications
    * Industry Standard JST/XH Balance Taps
    * 90 Day Manufacturer Warranty from Point of Customer Purchase

    Specifications:

    • Cell Count: 6S
    • Capacity: 3300mah
    • Discharge Rate: 45C
    • Charge Rate: 5C
    • Dimensions: 140±2mm x 43.5±22mm x 41.5±1.5mm  (LxWxH)
    • Weight: 498g
    • Balance Tap: JST-XH
  49. In Stock PULSE 3300mAh 6S 22.2V 65C - LiPo Battery

    For 500-size helicopter (T-Rex 500, Compass Atom 500...) or  550-size to 600-size helicopter with 12S config...

    * True 5C Charge Rates
    * Myriads of Voltages, Capacities & C Ratings
    * 15C / 25C / 35C / 45C / 65C Layouts for High Power Demands
    * Large Multi Rotor Packs Suited Specifically for Multi Rotor Demands
    * Multiple Airplane Battery Applications Available
    * Transmitter & Receiver Pack Options
    * Large AWG Wiring for Maximum Power Applications
    * Industry Standard JST/XH Balance Taps
    * 90 Day Manufacturer Warranty from Point of Customer Purchase

    Specifications:

    • Voltage: 22.2V
    • Cell Count: 6S
    • Capacity: 3300mAh
    • Discharge Rate: 65C
    • Charge Rate: 5C
    • Dimensions: 140±2mm x 43.5±1mm x 41.5±1.5mm (LxWxH)
    • Weight: 540g
    • Balance Tap: JST-XH