0

Shopping cart

0 items - $0.00

wishlist

More Views

Mikado LOGO New 700 Electric Helicopter - with VTX 717mm

SKU: MIK-2126
You will earn 999 points for buying this product

Availability: In Stock

$999.00
As low as$92.54/mo with Affirm Learn More
Write a review earn 100 points

Description



02126 LOGO 700 VTX 717 Combo

Systematically designed and put to the test, for tough competition flying.
The ideal 700 size machine, for every pilot, for every style of flying.

The LOGO 700 is the worthy successor to the venerable LOGO 700 XXtreme.

It utilizes tried and tested mechanical components like

  • Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise.
  • Belt step-up gear to the tail gear box in the chassis.
  • Torque tube.
  • Sturdy tail gear box now fully encapsulated, lighter, almost maintenance-free and protected against dust and dirt.

The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis.

The benefits at a glance:

  • Facilitates assembly, maintenance and repairs.
  • The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
  • The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
  • The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
  • The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
  • In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
  • Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
  • The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
  • The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.
The newly designed rotor head is lighter and looks more delicate, but at the same time gives you the same good flight- and control characteristics. It's as robust as ever.
 

Recommended main rotor blade sizes are 690-717 mm, depending on your personal taste and style of flying.

To power the 700, you can rely on reliable components from the LOGO 700 XXtreme, with 6 mm motor shafts.
Motors with other shaft diameters can be adapted easily by just replacing the shaft.

In the beginning, there will be two gear ratios available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.

Motors with a larger bell than e.g. a Scorpion 4525-520 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.

The newly designed canopy of the LOGO 700 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 700 accelerates faster and reaches higher top speeds when directly compared to it's predecessor. This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.

Color accents to the tail fin also help with visibility.

With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,300 g / 11.86 lb is possible.

Specifications:

Rotor diameter: 1,570 mm

Rotor blades:  690-717 mm carbon rotor blades

RTF weight:         > 5,300 g

recommended battery: 12 S Lipo, 5,000 mAh

Main gear ratio: 9.71 / 10.46

Main Gear size: 136 teeth, Module 1 25° herring bone

batterie slot:         69 x 67 x 360 mm

 

Contents:

Blades:         VTX Carbon Rotor Blades 717 mm

Tail Blades: Carbon Tail Rotor Blades 105 mm

Canopy:         Airbrush Glas Fiber Canopy

 

Recommended Accessories: (NOT INCLUDED)

Motor:                  Scorpion 4525-520 Kv Ultimate with 6 x 55 mm motor shaft

Motor pinion: 13/14 teeth pinion, modul 1 with 25° lead angle

VBar electronic: VBar NEO/VBar NEO VLink

Warranty, Returns & Support

Warranty Information

We truly thank you for your purchase, and when things go wrong, we are here to help in any way that we are capable of doing so.

In regards to any warranty related matter, please reference the below information to help understand our warranty policies, as these warranty policies are absolute when it comes to any purchase made via HeliDirect.

Warranty Time Frame

Regarding product(s) purchased via HeliDirect, each manufacturer has their own specified warranty time frame, and HeliDirect holds the sole right to direct the customer to the manufacturer for stated warranty support in regards to manufacturer's that require direct level warranty support.

Our stated (14) day return policy directly relates to brand new, unused products being returned for a refund or store credit, and does not relate to warranty related situations for faulty product(s). Faulty, damaged or problematic items are handled upon a case by case basis, and will be detailed below based upon the warranty options available.

Our team at HeliDirect is highly motivated to assist in every possible way regarding warranty support, but please be 100% aware that warranty support for the product(s) you have purchased may be handled directly via the manufacturer, and not through HeliDirect.

If your product(s) involve direct manufacturer support, we are still available to assist. We ask that the customer make the initial manufacturer contact for warranty support, but in the case where a manufacturer response is not receive within (5) business days, HeliDirect will step in upon your behalf, utilizing our channels to assist you with this manufacturer based support.

In the above case, HeliDirect will do everything in our power to make sure the manufacturer assists you directly, but please note that all such warranty in regards to an issue like this will still be directed through the manufacturer.

Warranty Related Issues

Please note that HeliDirect is not a warranty repair center, nor do we offer warranty regarding many items we resell. Product(s) purchased via HeliDirect are subject to the original vendor’s repair / replacement warranty policies & timelines, and will be directed to the manufacturer at our discretion.

HeliDirect will not assume responsibility and / or liability for any manufacturer defect, or damage due the use / misuse of the product(s) purchased. Further, HeliDirect cannot / will not be held liable for ancillary damage to product(s) based upon a manufacturer fault or defect. All such issues will be dealt with at the manufacturer based level.

If your item is found to have a fault or defect after installation or use, your product may be subject to warranty repair via the original manufacturer, no matter what the purchase date may be. HeliDirect does not cover repair, replacement or warranty via used / installed products. All such issues will need to be dealt with at the manufacturer level.

Damage Due to Ancillary Product Failure

In regards to damage that directly results to a failed product installed in conjunction with another product, we are happy to assist in terms of warranty support for the product that has failed, but please be aware that we cannot be held liable for ancillary damage to other items or components that may have been damaged due to the original product failure.

Warranty Returns

If your product is approved by our customer service staff as a valid return that we will handle directly, please note the below information regarding all such approved warranty items sent to HeliDirect.

- Any item(s) approved for return to HeliDirect will be subject to inspection and or testing to verify the noted information provided by the customer regarding the flaws, faults or damage.

- Due to the various aspects of testing, repair and other return processes, please be aware that any such approved return will require (2) to (5) business days for proper processing. Our staff will certainly do all that we can to reduce this time to the bare minimum, but please be aware that the return process can take up to (5) business days to complete.

- If the product(s) approved for return are deemed faulty by our returns specialists, we will proceed with a repair, exchange, credit or refund based upon the situation at hand. All such information will be communicated to the customer before any re-shipment is made.

- If an item that encounters a warranty issue after usage, HeliDirect may opt to repair the product versus an exchange, as exchanges can only be made for valid warranty relating to products that have no use of flaws. Our staff will be sure item is in 100% working order based upon any repairs, but exchanges, credits or refund cannot be offered for items under warranty that have been used and are no longer able to be sold as new.

- In the case of product(s) returned to us that test to be non faulty, the product(s) will be returned to the customer in the condition received. Our staff will reach out to the customer with necessary information regarding what may have been missed, and what steps to take in order to utilize the product(s) effectively.

- For non faulty diagnoses of returned product(s), refunds, store credits or exchanges cannot be offered, as the product(s) received cannot be sold as new and unused.

Spare & Accessories

  1. In Stock Mikado Anti-Static Kit
    -
  2. In Stock Mikado Ball Bearing 10x19x5
    -
  3. In Stock Mikado Ball Bearing 14x25x6
    -
  4. In Stock Mikado Ball Bearing 15x21x4
    -
  5. In Stock Mikado Ball Bearing 5x10x4
    -
  6. Back-Order Mikado Ball Links 2.5 mm (20 pcs)
    -
  7. In Stock Mikado Battery Plate Locking
    -
  8. In Stock Mikado Battery Plate LOGO 700
    -
  9. In Stock Mikado Blade Holder 12 mm Blade Grip - incl. Screws Mikado Blade Holder 12 mm Blade Grip - incl. Screws
  10. In Stock Mikado Blade Holder Arm Set- LOGO 700
    -
  11. In Stock Mikado Canopy Grommets
    -
  12. In Stock Mikado Control Sleeve For Tail Rotor Shaft Mikado Control Sleeve For Tail Rotor Shaft
    -
  13. In Stock Mikado Driven Belt 564 XL
    -
  14. In Stock Mikado Herringbone Main Gear (153T/M0.7)
    -
  15. In Stock Mikado Herringbone Main Gear (212T/M0.5)
    -
  16. In Stock Mikado Holder For Torque Tube With Ball Bearing - LOGO 700
  17. In Stock Mikado Horizontal Fin With Clamps - LOGO 700
    -
  18. In Stock Mikado Linkage Set For Swashplate - LOGO 700
    -
  19. In Stock Mikado Lower Side-Frame Left - LOGO 700
    -
  20. In Stock Mikado Lower Side-Frame Right - LOGO 700
    -
  21. In Stock Mikado Main Gear 136 Teeth - Modul 1 - LOGO 700
    -
  22. In Stock Mikado One Way Hub - LOGO 700
    -
  23. In Stock Mikado Pinion for Herringbone Gear 13 Teeth 25 (Logo 700)
  24. In Stock Mikado Pinion for Herringbone Gear 14 Teeth 25 (Logo 700)
  25. In Stock Mikado Safety Ring C-Clip (10mm shaft)
    -
  26. In Stock Mikado Spindle Shaft 86mm Steel
    -
  27. In Stock Mikado Steel Tail Rotor Hub For Thrust Bearings
    -
  28. In Stock Mikado Tail Boom 25x774mm - LOGO 700
    -
  29. In Stock Mikado Tail Boom Brace - LOGO 700
    -
  30. In Stock Mikado Tail Pitch Plate With Hinges
    -
  31. In Stock Mikado Tail Rotor Belt Tensioner
    -
  32. In Stock Mikado Tail Rotor Blade Holder
    -
  33. In Stock Mikado Tail Rotor Case - LOGO 700
    -
  34. In Stock Mikado Tail Rotor Hub - 5mm
    -
  35. In Stock Mikado Tail Rotor Hub With Thrust Bearings (full-set)
  36. In Stock Mikado Tail Rotor Lever Ball Raced
    -
  37. In Stock Mikado Tail Rotor Linkage - LOGO 700
    -
  38. In Stock Mikado Tail Rotor Shaft With Bevel Gear - LOGO 700
  39. In Stock Mikado Thrust Bearing 4x8x3.5
    -
  40. In Stock Mikado Thrust Bearing 5x10x4
    -
  41. In Stock Mikado Thrust Bearing 6x14x5
    -
  42. In Stock Mikado Torque Tube 10x743mm - LOGO 700
    -
  43. In Stock Mikado Upper Side-Frame Left - LOGO 700
    -
  44. In Stock Mikado Upper Side-Frame Right - LOGO 700
    -
  45. In Stock Mikado Vertical Fin - LOGO 700
    -
  46. In Stock Mikado Y-link
    -
  47. In Stock PULSE 5000mAh 6S 22.2V 65C - LiPo Battery

    For 550-size to 600-size helicopter with 6S config (T-Rex 550L, Goblin 570) or 700-size helicopter (12S config)...

    * True 5C Charge Rates
    * Myriads of Voltages, Capacities & C Ratings
    * 15C / 25C / 35C / 45C / 65C Layouts for High Power Demands
    * Large Multi Rotor Packs Suited Specifically for Multi Rotor Demands
    * Multiple Airplane Battery Applications Available
    * Transmitter & Receiver Pack Options
    * Large AWG Wiring for Maximum Power Applications
    * Industry Standard JST/XH Balance Taps
    * 90 Day Manufacturer Warranty from Point of Customer Purchase

    Specifications:

    • Cell Count: 6S
    • Capacity: 5000mah
    • Discharge Rate: 65C
    • Charge Rate: 5C
    • Dimensions: 167±2mm x 47.5±1mm x 47±1.5mm  (LxWxH)
    • Weight: 755g
    • Balance Tap: JST-XH
  48. In Stock PULSE 5500mAh 6S 22.2V 65C - LiPo Battery PULSE 5500mAh 6S 22.2V 65C - LiPo Battery
    For 550-size to 600-size helicopter with 6S config (T-Rex 550L, Goblin 570) or 700-size  to 800-size helicopter (12S config)…

    * True 5C Charge Rates
    * Myriads of Voltages, Capacities & C Ratings
    * 15C / 25C / 35C / 45C / 65C Layouts for High Power Demands
    * Large Multi Rotor Packs Suited Specifically for Multi Rotor Demands
    * Multiple Airplane Battery Applications Available
    * Transmitter & Receiver Pack Options
    * Large AWG Wiring for Maximum Power Applications
    * Industry Standard JST/XH Balance Taps
    * 90 Day Manufacturer Warranty from Point of Customer Purchase

    Specifications:

    • Voltage: 22.2V
    • Cell Count: 6S
    • Capacity: 5500mAh
    • Discharge Rate: 65C
    • Charge Rate: 5C
    • Dimensions: 166±2 x 47.5±1mm x 54±1.5mm (LxWxH)
    • Weight: 830 grams
    • Balance Tap: JST-XH

Electronics

  1. Back-Order Scorpion Tribunus II 14-200A ESC (SBEC) Scorpion Tribunus II 14-200A ESC (SBEC)
    -
  2. In Stock Express 05131 VBar NEO VLink 6.1 Express - Neon Yellow
  3. In Stock Kontronik 4816 Kosmik 160 HV ESC
    esc, escs, kontronik esc, kontronik escs, hobby wing escs, hobbywing esc, electronic speed controllers, electronic speed controller
  4. In Stock PHOENIX EDGE 160HVF W/COOLING FAN, NO BEC
    esc, escs, castle creations esc, castle creations escs, castle esc, castle escs, electronic speed controller, electronic speed controllers
  5. In Stock BK Standard Size Servo DS-7003HV Combo (3 Servos in one box)

    DS-7003HV Cyclic Servo Perfect balance between speed and torque Completely redesigned and unique, thermal efficient CNC case Sold individually or as a set of 3 Operation Voltage: 6V - 8.4V
    Weight: 65g (2.29 Oz)
    Torque: 26.8 kg/cm (372.18 oz/in) @ 8.4V
    22.3 kg/cm (309.68 oz/in) @ 7.4V
    19.5 kg/cm (265.94 oz/in) @ 6V
    Speed: 0.065 sec/60 @ 8.4V
    0.078 sec/60 @ 7.4V
    0.085 sec/60 @ 6V
    Dimensions: 20x40x37 mm
    Frequency: 1520us/333 hz

    In The box:

    3 Servos

  6. In Stock KST BLS805X 7.5KG Torque Metal Gear Servo For 550-700 Class Helicopter Tail KST BLS805X 7.5KG Torque Metal Gear Servo For 550-700 Class Helicopter Tail

    Description:

    Operating Speed: 0.048sec/60°@6.0V
    Operating Speed: 0.042sec/60°@7.4V
    Operating Speed: 0.039sec/60°@8.4V
    Stall Torque: 7.5Kg.cm@8.4V
    Stall Torque: 6.5Kg.cm@7.4V 
    Stall Torque: 5.5Kg.cm@6.0V
    Dimensions: 40.5*20*37mm
    Operating Voltage: 6.0V-8.4V
    Operating signal
    : 760us / 560Hz
    Motor type: Brushless
    Ball Bearing: 2BB
    Weight: 70g

    Usage: for 550-700 Class Helicopter Tail

    Features:

    High quality brushless motors
    High strength 2BB ball bearings
    Standard rudder servo arm
    Metal steering gear, long service life
    Good performance digital servos

    Package Included:

    1 x KST BLS805X 7.5KG Torque Metal Gear Servo for 550-700 Class Helicopter Tail

  7. In Stock MKS HBL880 0.032 sec/60 (11.19kg.cm 8.2V) - 8mm Output Shaft

    Suitable Gyros
    Spartan DS760、Spartan Quark、Futaba GY611、GY601、GY520、ALIGN GP700、GP750、Mikado V-Bar Tail、CSM SL720、Curtis Youngblood Mini-G 、Solid G、Thunder Tiger TG-7000、BeastX Mircobeast
    Torque: 8.2 kg-cm (6.0V) │10.1 kg-cm (7.4V) │11.19 kg-cm (8.2V)
    Speed: 0.044 s (6.0V)  │  0.036 s (7.4V) │ 0.032 s (8.2V)
    Weight: 73.2 g
    Dimensions:40 x 20 x 38.5 mm  
    Operating Voltage:6.0 ~ 8.4 V DC Volts  ( 2S Lipo un-regulated)
    Working frequence:760μs / 560hz
    Dead band:------
    Bearing Type:2BB   
    Motor Type:Brushless Motor
    Gear Type:Chrome-Titanium alloy gear
    Note: Due to the high torque output of this servo, this MKS servo uses an 8mm servo output shaft, and therefore traditional standard sized servo arms will not fit.

  8. In Stock KST BLS915 V2 Brushless Standard Servo For 550-700 Helicopters-The Stronger Brushless Motor And More Powerful Electronics

    The KST BLS915 V2 is the successor to the KST BLS915 (V1).

    The KST BLS915 V2 is a top class swashplate servo for 3D aerobatics. The BLS 915 V2 is absolutely robust thanks to the aluminum housing and the improved steel gearbox.

    The KST BLS915 V2 offers the following advantages over the BLS815.

    Due to the stronger brushless motor and more powerful electronics in conjunction with the hardened steel gearbox, the BLS915 V2 is clearly a class above the BLS815.

    The new housing with cooling fins extends the temperature range of the servo to 65 ° C.

    The high positioning speed in conjunction with the offered performance, the KST BLS915V2 HV is very well suited for advanced 3D helicopter pilots.

    Ideal for helicopters of the 600 to 700 class.

    Please refer to the servo specification of the model manufacturer when selecting the servos.

    Technical specifications:

    Operating voltage: DC 6.0v-8.4v

    Dimensions: 40.50 * 20 * 38mm

    Torque: 
    25kg.cm @ 8.4v 
    22kg.cm @ 7.4v 
    18kg.cm @ 6.0v

    Speed: 
    0.07sec / 60 ° @ 8.4v 
    0.08sec / 60 ° @ 7.4v 
    0.09sec / 60 ° @ 6.0v

    Weight: 78g 
    Working Frequency : 1520us / 333hz 
    Engine: brushless 
    Ball Bearing: 2 compartment

  9. In Stock KONTRONIK 48161 COOL KOSMIK 160 HV ESC
    esc, escs, kontronik esc, kontronik escs, hobby wing escs, hobbywing esc, electronic speed controllers, electronic speed controller
  10. Back-Order Mikado VBar Neo Vlink 6.1 Express
    -
  11. In Stock MKS HBL850 (0.071s/60- 24.9kg.cm@8.2v) - 8mm Output Shaft

    Torque: 18.2 kg-cm (6.0V) │ 22.5 kg-cm  (7.4V) │ 24.9 kg-cm (8.2V)
    Speed: 0.10 s (6.0V)  │  0079 s (7.4V) │ 0.071 s (8.2V)
    Weight: 73 g
    Dimensions:40 x 20 x 38.5 mm   
    Operating Voltage:6.0 ~ 8.4 V DC Volts  ( 2S Lipo un-regulated )
    Working frequence:1520μs / 333hz
    Dead band:--------(Default)
    Bearing Type:2BB   
    Motor Type:Brushless Motor
    Gear Type:Chrome-Titanium alloy gear
    Note: Due to the very high torque output of this servo, this MKS servo uses a larger 8mm servo output shaft, and therefore traditional standard size servo arms will not fit.
    Notice

    1. For all series servos, please Do Not use hand or tool to turn output gear
        directly when power is on or off. Otherwise, it is probable to damage
        interior electronic parts.
    2. Please use the servo according to prescript operating voltage.
        Please Don Not add voltage for promoting efficacy of servo.

  12. In Stock Scorpion HKII-4525-520KV - ULTIMATE

    *This motor is using 30mm bolt spacing on the mounting with M4 Screw holes

    Specifications

    Stator Diameter: 45mm (1.77") 
    Stator Thickness: 25mm (0.98") 
    No. of Stator Arms: 12 
    No. of Stator Poles: 10 
    Motor Wind: 5+6T YY  
    Motor Wire: 1-Strand 1.4 mm 
    Motor Kv: 520KV RPM/Volt 
    No-Load Current (Io/10V): 1.75 Amps 
    Motor Resistance (RM): 0.012 Ohms 
    Max Continuous Current: 100 Amps 
    Max Continuous Power: 4450 Watts 
    Weight: 503 Grams (17.74 oz) 
    Outside Diameter: 56.7mm (2.23") 
    Shaft Diameter: 5.98mm (0.24") 
    Body Length: 53.4mm (2.10") 
    Overall Shaft Length: 91.5mm (3.60") 
    Max Lipo Cell: 12s 
    Max Peak Current: 230A (2 seconds) 
    Max Peak Power: 10200 Watts (2 seconds) 
    Motor Timing: 5 deg to 15 deg 
    Drive Frequency: 8kHz

    Weight including packaging

    780g

  13. In Stock Xpert R2T Standard Size Aluminum Tail Servo Xpert R2T Standard Size Aluminum Tail Servo

    Features:

    • Quick release cable that allows easy and quick installation for all helicopters.
    • Brushless motor design provides extremely high speed, top efficiency, and low power consumption.
    • 4096 resolution and SIC (Single Integrated Circuit) for the highest performance and durability.
    • Light weight design
    • Aluminum upper and center case.
    • Plastic bottom case.
    • Strong Metal Gear
    • Glitch-free
    • Sophisticated error correction
    • High-Speed, High-precision 12-bit AD converter and CPU calculation
    • Fail safe
    • Over current protection
    • Over temperature protection
    • Start sonorant
    • 760us narrow band
    • Operating frequency up to 800Hz


    Product Note: Not compatible (will not function) with Bavarian Demon 3SX & Bavarian Demon 3X. Fully functional with latest "Axom" Bavarian Demon products.

  14. Pre-Order Futaba CGY760R FBL Helicopter Gyro Futaba CGY760R FBL Helicopter Gyro
    -
  15. In Stock PHOENIX EDGE 160 HV (50V 160 AMP) BRUSHLESS ESC
    esc, escs, castle creations esc, castle creations escs, castle esc, castle escs, electronic speed controller, electronic speed controllers
  16. Back-Order Mikado Vbar Neo VLink and Gyrosensor 6.1 Express
    -
  17. In Stock BK Standard Size Servo DS-7003HV Kyle Stacy Edition

    DS-7003HV Cyclic Servo Perfect balance between speed and torque Completely redesigned and unique, thermal efficient CNC case Sold individually or as a set of 3 Operation Voltage: 6V - 8.4V
    Weight: 65g (2.29 Oz)
    Torque: 26.8 kg/cm (372.18 oz/in) @ 8.4V
    22.3 kg/cm (309.68 oz/in) @ 7.4V
    19.5 kg/cm (265.94 oz/in) @ 6V
    Speed: 0.065 sec/60 @ 8.4V
    0.078 sec/60 @ 7.4V
    0.085 sec/60 @ 6V
    Dimensions: 20x40x37 mm
    Frequency: 1520us/333 hz

  18. In Stock Bert Kammerer FULL SIZE TAIL SERVO BLS-8005HV Bert Kammerer FULL SIZE TAIL SERVO BLS-8005HV
    tail servo, servos, tail servos, servo, servos1, bk servo, bk servos, bert kammerer, bert kammerer servo, bert kammerer servos, bk tail servo, bert kammerer tail servos, bert kammerer tail servo, bk tail servo
  19. In Stock Xnova Lightening Outrunner Motor 4525 - 530KV For RC Helicopter Shaft A

    We have spent hours of testing to improve the very well established 4525 series. The result is an even better overall performing motor and increased efficiency. This all will provide you a cooler running motor and also more consistent power delivery over the full flight. The Xnova V3 lightning series is the highest level of motor performance money can buy nowadays.
    Xnova brushless high performance outrunner motor designed for extrem 3D, 600-690mm bladesize helicopter where highest power to weight ratio is important. It is a extreme power plant specially developed for the new Logo_700 helicopter. It is a insane powerhouse and also a very efficient and cool runnning option for any other 700 light setup competition machine.
    - Improved higher efficiency with thinner stator lamination, designed with integrated cooling system resulting in lower temperature.
    - Increased power output by the use of thicker hand wound YY single strand copper wires, heat resistant up to 300 degrees C.
    - High-performance neodymium magnets, heat resistant up to 180 degrees C.
    - All other features same as XTS series.
    Xnova LIGHTNING 4525 series ( thick Wire)
    Designed for extrem 3D 630-690mm blade size helicopter where highest power to weight ratio is important. From 10S up to 12S ( KV related )
    SHAFT TYPE SELECTION BASED ON THE ILLUSTRATION BELOW A,C,F


  20. In Stock Xnova XTS 4525-560KV Brushless Motor with Thick Wires - Shaft A Xnova XTS 4525-560KV Brushless Motor with Thick Wires - Shaft A

    Slots & Poles:12n10p
    Winding T:YY with thick wire
    rpm/V:560
    Volt (V):20 | 30 | 40
    Io(A):3.4 | 4.5 |5.6
    Rm (mohm):9 | 9| 9
    Weight (without connector) (g)    :480
    Body Length (no shaft) mm:55.5
    Diameter (mm):55.7
    Shaft Length (mm) (Details pictures):36
    Shaft Dia. (mm):6 | 8
    Mounting Holes CTC Distance (mm):30
    Mounting Screw:4x07
    Max Eff. Curr.    86.92 | 122.47 | 157.76 |
    Max Eff.    92.18 | 92.65 | 92.90 |
    Kt (Nm/A:0.0171
    Km (Nm/sqrt(w))    :0.1797
    Max Continuous Power(Watts)    :5000
    Peak Continuous Power(Watts) (5 sec):10000 (2sec)
    Max cont. current (A):100

  21. Back-Order Mikado VBar Neo 6.1 Express
    -
  22. Back-Order Bert Kammerer  FULL SIZE CYCLIC SERVO BLS-8002HV

    This brushless cyclic servo offers incredible speed, excellent centering and it is 100% high voltage compatible. Ideal for 600, 700 and even 800 class machines.
    Features

    - High Voltage
    -High Speed
    -Excellent Centering
    -Compatible with Futaba type horns/arms
    -Unique CNC Design
    -Light Weight
    -Operation Voltage: 6V – 8.4V
    -Weight: 65g (2.29 Oz)
    -Torque: 15.6 kg/cm (216.5 oz/in) @ 6V | 19.9 kg/cm (276.2 oz/in) @ 7.4V | 23.5 kg/cm (326.2 oz/in) @ 8.4V
    -Speed: 0.073 sec/60 @ 6V | 0.067 sec/60 @ 7.4V | 0.056 sec/60 @ 8.4V
    -Dimensions: 20x40x37 mm
    -Frequency: 1520us/333 hz
    -Gear Type: Metal
    -Motor Type: Brushless

  23. In Stock KST X20 V2.0 Helicopter Brushless Servo Combo Pack KST X20 V2.0 Helicopter Brushless Servo Combo Pack

    The KST X20 V2.0 Helicopter Servo Pack includes three V2.0 X20-2208 Cyclic Servos, and one V2.0 X20-1035 Tail Servo. The X20 Servos feature a brushless motor, full CNC aluminum case, and a complete set of Titanium gears through out each servo. The cyclic servos boast an incredible 347 oz/in (25kg.cm) of torque at 8.4V, and a crisp 0.07 speed. The tail servo offers 166oz/in of torque at a blistering fast 0.03 speed at 8.4V

    The developers at KST ensured nothing but the best components were utilized during construction of this servo, components as large as motors and gears, materials for the servo case,and small components such as the PCB board driving the motor. EMF currents in common DC voltage applications can generate large EMF spikes under operation, which can wreak havoc on other connected electronics. X20 servos feature a PCB board which minimizes EMF spikes, protecting other electronics from having to filter out the noise.   

    Features:

        Standard size aluminum case
        Low EMF design
        Full metal gears
        Dual ball bearings
        HV compatible

    Specifications:   

    Operating Voltage: 6-8.4V   
    Size: 40.5x20x38mm (width x height x thickness)  
    Torque (Cyclic): 18kg.cm @ 6.0V; 25kg.cm @ 8.4V | 249oz/in @ 6.0V; 350oz/in@ 8.4V  
    Speed (Cyclic): 0.15sec/60° @ 6.0V; 0.11sec/60° @ 8.4V  
    Torque (Tail): 8.5kg.cm @ 6.0V; 12kg.cm @ 8.4V | 117oz/in @ 6.0V; 166oz/in@ 8.4V  
    Speed (Tail): 0.04sec/60° @ 6.0V; 0.03sec/60° @ 8.4V    
    Weight: 75g   
    Working Frequency (Cyclic): 1520us/333Hz, 800us - 2200us   
    Working Frequency (Tail): 760us/560Hz  
    Motor: Brushless   
    Ball Bearing: 2BB

  24. In Stock BK Standard Size Tail Servo DS-7007HV Kyle Stacy Edition

    DS-7007HV Tail Servo Lightning fast speed of 0.035 ms/60 degrees at 8.4 volts Very high speed/torque ratio producing 211 oz/in of torque at 8.4 volts Completely redesigned and unique, thermal efficient CNC case

    Specs
    Operation Voltage: 6V - 8.4V
    Weight: 65g (2.29 Oz)
    Torque: 15.2 kg/cm (211.1 oz/in) @ 8.4V
    13.7 kg/cm (190.3 oz/in) @ 7.4V
    12.2 kg/cm (169.4 oz/in) @ 6V
    Speed: 0.035 sec/60 @ 8.4V
    0.041 sec/60 @ 7.4V
    0.053 sec/60 @ 6V
    Dimensions: 20x40x37 mm
    Frequency: 760us/333 hz

  25. In Stock Kontronik 4820 Kosmik 200 HV ESC
    esc, escs, kontronik esc, kontronik escs, hobby wing escs, hobbywing esc, electronic speed controllers, electronic speed controller
  26. In Stock KONTRONIK 48201 COOL KOSMIK 200 HV ESC
    esc, escs, kontronik esc, kontronik escs, hobby wing escs, hobbywing esc, electronic speed controllers, electronic speed controller
  27. In Stock Tengu 4525HS / 515kV Motor

    Manufacturer    :EGODRIFT
    Motor class:4525
    Motor configuration:12N10P
    Motor weight:460g (16.22oz)
    Base Colour    :Black
    Wire colour:Copper
    Motor wire type:High temperature copper wire
    Motor shaft:Hardened Steel
    Shaft diameter:6.0 mm
    LiPo cells:12S
    Motor kV    :515 kV
    Roations/Min/Volt (kV)    :515 kV
    Stator diameter:45 mm
    Stator height (mm):25 mm
    Diameter:56.40 mm
    Diameter fixing holes (mm):4,0 mm
    Idle current:3.2A
    Maximum Current (180s):100A (Peak: 200A / 2 seconds)
    Max. Power (180s):5000W (Peak 9600W / 2 seconds)
    Internal resistance (in Ohm):24 mOhm
    Connection:Wire / Gold plated plugs
    Designer:Yutao Zou
    What's in the box    
    - 1x Tengu 4525/515kV motor for 700 sized helicopters
    - 35mm exterior length shaft to fit XLPower, SAB, Gaui and other models
    - Gold plated connectors
    - Mounting screws

  28. In Stock Bert Kammerer FULL SIZE CYCLIC SERVO DS-7001HV
  29. Back-Order Bert Kammerer  FULL SIZE CYCLIC SERVO DS-7002HV Bert Kammerer  FULL SIZE CYCLIC SERVO DS-7002HV
  30. In Stock Scorpion Tribunus 14-300A ESC SBEC Scorpion Tribunus 14-300A ESC SBEC
    -
  31. In Stock Xpert HS-2202T-HV KD1T Standard Size Full Aluminum Servo Xpert HS-2202T-HV KD1T Standard Size Full Aluminum Servo

    Features

    • Developed and tuned by World Champion Helicopter Master, Kyle Dahl.
    • Global 3D 2017 Competition Winning Servo.
    • Ultra High Responsive cyclic algorithm software.

    Quick release cable that allows easy and quick installation for all helicopters.

    • Brushless motor design provides extremely high speed, top efficiency, and low power consumption.
    • 4096 resolution and SIC (Single Integrated Circuit) for the highest performance and durability.
    • Light weight design
    • All Aluminum case for the best thermal dissipation and durability.
    • Strong Metal Gear
    • Glitch-free
    • Sophisticated error correction
    • High-Speed, High-precision 12-bit AD converter and CPU calculation
    • Fail safe
    • Over current protection
    • Over temperature protection
    • Start sonorant
    • 760us narrow band
    • Operating frequency up to 800Hz

    Type : Standard
    Product Name:HS-2202T-HV KD1T Standard Size Full Aluminum Servo
    Part Name:HS-2202T-HV
    Power Supply:6.0V~8.4V
    Speed (sec/ 60°):@6.0V: 0.047 sec/60° @7.4V: .038 sec/60° @8.4V: .033 sec/60°
    Torque (oz/in):@6.0V: 83.28 oz-in @7.4V: 102.71 oz-in @8.4V: 116.59 oz-in
    Torque (kg/cm):@6.0V: 6.00 kg-cm @7.4V: 7.40 kg-cm @8.4V: 8.40 kg-cm
    Dimensions:40x37.80x20 mm
    Weight:73.6g
    Frequency:200/333 Hz
    Range:50~400 Hz
    Center Position:760us
    Applications:Helicopter Tail

  32. In Stock Xpert HS-6402-HV KD1 Standard Size Full Aluminum Servo Xpert HS-6402-HV KD1 Standard Size Full Aluminum Servo
  33. In Stock BavarianDEMON Axon BavarianDEMON Axon
    -
  34. In Stock HobbyWing 200A V4.1 ESC HV (6-14S) - SBEC HobbyWing 200A V4.1 ESC HV (6-14S) - SBEC
    -
  35. In Stock Bert Kammerer  FULL SIZE CYCLIC SERVO BLS-8001HV Bert Kammerer  FULL SIZE CYCLIC SERVO BLS-8001HV
    servos1, bk servo, bk servos, bert kammerer, bert kammerer servo, bert kammerer servos
  36. In Stock iKON2 HD Flybarless System - Micro USB Cable Not Included iKON2 HD Flybarless System - Micro USB Cable Not Included
  37. In Stock Scorpion HKII-4530-500KV Brushless Motor 6mm 55mm
    -
  38. Back-Order Bert Kammerer FULL SIZE TAIL SERVO DS-7006HV Bert Kammerer FULL SIZE TAIL SERVO DS-7006HV
    -
  39. In Stock Tengu 4530HS / 510kV Motor

    Manufacturer    :EGODRIFT
    Motor class    :4530
    Motor configuration    :12N10P
    Motor weight    :525g (17.25oz)
    Base Colour    :Black
    Wire colour:Copper
    Motor wire type:High temperature copper wire
    Motor shaft:Hardened Steel
    Shaft diameter:6.0 mm
    LiPo cells:12S
    Motor kV    :510 kV
    Roations/Min/Volt (kV)    :510 kV
    Stator diameter:45 mm
    Stator height (mm):30 mm
    Diameter:56.40 mm
    Diameter fixing holes (mm):4,0 mm
    Idle current:3.7A
    Maximum Current (180s):115A (Peak: 230A / 2 seconds)
    Max. Power (180s):5800 W (Peak: 10200W / 2 seconds)
    Internal resistance (in Ohm):19.8 mOhm
    Connection:Wire / Gold plated plugs
    Designer:Yutao Zou
    What's in the box    
    - 1x Tengu 4530/510kV motor for 700 sized helicopters
    - 35mm exterior length shaft to fit XLPower, SAB, Gaui and other models
    - Gold plated connectors
    - Mounting screws

  40. In Stock Scorpion HKII-4530-540KV Brushless Motor 6mm 55mm
    -
  41. In Stock HobbyWing Platinum PRO V4 130A HV ESC (6S-14S) HobbyWing Platinum PRO V4 130A HV ESC (6S-14S)
    -
  42. In Stock Mikado VBar Neo and Gyrosensor  6.1 Express
    -
  43. In Stock BeastX Microbeast Plus Flybarless Unit
    -
  44. In Stock iKON2 Flybarless System - Micro USB Cable Not Included
  45. In Stock Xpert R2 Standard Size Aluminum Cyclic Servo Xpert R2 Standard Size Aluminum Cyclic Servo
    -