Align 450DFC Main Rotor Head Upgrade Set/Blue (Swashplate & Feathering Shaft NOT Included)

Align
|
H45162QNT
You will earn 48.99 points for buying this product
Price Match Guarantee
$44.09 $48.99( / )
  Product illustration:   Appearance:   Appearance: Appearance: Package: Package: Instruction: Specification: Instruction:●Follow by 700 DFC/600 DFC's design, the 450 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision, resulting in superior 3D performance and unimaginable flight speed with...

 

Product illustration:
 
Appearance:
 
Appearance:
Appearance:
Package:
Package:
Instruction:Specification:
Instruction:
●Follow by 700 DFC/600 DFC's design, the 450 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision, resulting in superior 3D performance and unimaginable flight speed with extremely attractive design.


Features:
●Extreme low CG and short main shaft design, dramatically reduces flight resistance, effectively improves T-Rex 450's 3D performance and speed.
●New style linkage rod design, complete assembly increases linkage rod rigidity, allowing the pitch slider (follower) to be omitted, resulting in a head assembly that is much simplified and rigid.
●Upgrading to the 450DFC rotor head assembly is extremely easy; just replace the head block included in the 450DFC kit, connect the 450DFC linkage assembly, and replace the main shaft with 450DFC main shaft. Existing swashplate is kept in the upgrade.
●The damper rubbers are manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.
●Suitable for all T-REX 450 Pro/Sport V2 flybarless system Use 450 SE/SPORT must purchase additional dedicated Main Shaft Set- H45H001XXW

●450DFC Main Rotor Head Assembly-Blue x 1
●450DFC Main Blade Grip-Blue x 2
●84ZZ Bearing x 4
●450DFC Damper rubber x 2 (POM Φ4xΦ6.5x3.8mm)
●Spacer × 2
●Socket collar screw(M2x12mm) x 1
●M2 Nut × 1
●M2 collar screw(M2x15mm) x 2
●450DFC Main rotor grip arm integrated control link x 2
●450DFC Main rotor grip linkage bearing sleeve x 2
●681ZZ-d2 Bearing(Φ2x4.5x2mm) x 4
●450DFC Linkage rod A x 2
●Ball link × 2
●450DFC Main Shaft x 1
●Socket collar screw × 2(M3x16mm)
●M3 Nut × 2(M3)
●Main shaft spacer × 1(Φ5×Φ9×0.1mm)
●Main shaft spacer × 1(Φ5×Φ9×0.2mm)

Type: 

Helicopter Part

Vendor: 

Align

SKU: 

H45162QNT

Weight: 

0.8 lb


Product Spare Parts


Electronics

Customer Reviews

Based on 11 reviews
91%
(10)
9%
(1)
0%
(0)
0%
(0)
0%
(0)
R
Richard J.
450 dfc

seems to work fine

C
Casey J.
450DFC Main Rotor Head

Bought this Head to replace the plastic one that came on the 450L ARF. It looks well made and I believe will do a great job once I get it switched out.

R
Rich G.
Good as it gets

Great product. Put it on a V1 450 Sport and had to switch out the top bearing block from a 5mm thick bearing to a 4mm thick bearing (Boca $16) to make the bottom bolt on the shaft align. The old 450 flies exceptional with a mini Vbar. Definitely my favorite go to Heli for my first flights. The threaded ball ends are extremely delicate so I unbolted from the head, got hem both the same length, snapped on the wash balls first then bolted back on to the head. Worth the money and modification time.

F
Fede V.
Excellent Product as Expected

The product has the highest quality, as it has been my experience. HOWEVER, I paid extra money (a lot) to get it sooner, but it did not get there as expected.

W
Warren D.

always well made

M
Matt

Converted my old Trex 450 SEV2. What a difference! You need to change the main shaft but can keep the original swashplate. Definitely wakes up the heli's performance.

T
Tom W.

You use your old thrust bearings and feathering shaft, that is if there good otherwise order new!
If your installing on a 450 Sport or SE you need a new main shaft to Align #H45H001XXW

L
Luis L.

Excellent substitution for the basic plastic head that comes with the TREX 450 DFC Plus. The only issue I found was the time this shipment took to get to my address.

F
Franz

Yeah, I'm with Konrad, should have been more clear that the feathering shaft and a few parts don't come with it....I'm upgrading from flybarred SE to DFC FBL version...

K
Konrad

Head is not complete. Needs Feathering Shaft, Thrust Bearing and 5.5x8x0.4 Washer, P/Ns not given. Align assumes you are up grading from an Align SE v2 of newer head.
Like the design, but not the package. It should be complete.

Customer Reviews

Based on 11 reviews
91%
(10)
9%
(1)
0%
(0)
0%
(0)
0%
(0)
R
Richard J.
450 dfc

seems to work fine

C
Casey J.
450DFC Main Rotor Head

Bought this Head to replace the plastic one that came on the 450L ARF. It looks well made and I believe will do a great job once I get it switched out.

R
Rich G.
Good as it gets

Great product. Put it on a V1 450 Sport and had to switch out the top bearing block from a 5mm thick bearing to a 4mm thick bearing (Boca $16) to make the bottom bolt on the shaft align. The old 450 flies exceptional with a mini Vbar. Definitely my favorite go to Heli for my first flights. The threaded ball ends are extremely delicate so I unbolted from the head, got hem both the same length, snapped on the wash balls first then bolted back on to the head. Worth the money and modification time.

F
Fede V.
Excellent Product as Expected

The product has the highest quality, as it has been my experience. HOWEVER, I paid extra money (a lot) to get it sooner, but it did not get there as expected.

W
Warren D.

always well made

M
Matt

Converted my old Trex 450 SEV2. What a difference! You need to change the main shaft but can keep the original swashplate. Definitely wakes up the heli's performance.

T
Tom W.

You use your old thrust bearings and feathering shaft, that is if there good otherwise order new!
If your installing on a 450 Sport or SE you need a new main shaft to Align #H45H001XXW

L
Luis L.

Excellent substitution for the basic plastic head that comes with the TREX 450 DFC Plus. The only issue I found was the time this shipment took to get to my address.

F
Franz

Yeah, I'm with Konrad, should have been more clear that the feathering shaft and a few parts don't come with it....I'm upgrading from flybarred SE to DFC FBL version...

K
Konrad

Head is not complete. Needs Feathering Shaft, Thrust Bearing and 5.5x8x0.4 Washer, P/Ns not given. Align assumes you are up grading from an Align SE v2 of newer head.
Like the design, but not the package. It should be complete.