Align Metal Stabilizer Mount / Belt - Trex 550 DFC / 550X / Trex 600E / 600EFL / 600N / 600 DFC / 600L Dominator

Align
|
H60188T
You will earn 19.99 points for buying this product
Price Match Guarantee
$19.99 $0.00( / )
Product: Appearance: Package: Instruction: Specification: ●Use for T-REX 600/600 Nitro. ●Stabilizer mount(Upper) x 1●Stabilizer mount(Lower) x 1●3K carbon vertical stabilizer x 1●Socket collar screw x 2(M3x22mm)●Socket screw x 2(M3x8mm)●M3 specialty washer x 4(Φ3xΦ8x2mm)

Product:
Appearance:
Package:

Instruction:Specification:
●Use for T-REX 600/600 Nitro.●Stabilizer mount(Upper) x 1
●Stabilizer mount(Lower) x 1
●3K carbon vertical stabilizer x 1
●Socket collar screw x 2(M3x22mm)
●Socket screw x 2(M3x8mm)
●M3 specialty washer x 4(Φ3xΦ8x2mm)
Type: 

Helicopter Part

Vendor: 

Align

SKU: 

H60188T

Weight: 

0.19 lb


Product Spare Parts

Customer Reviews

Based on 9 reviews
100%
(9)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Cory T.
Durable Crash Replacement

Survivor or crashes more often than the plastic ones. It should have been in the kit.

M
Michael
A little bling for my new machine

This looks a lot more professional than the plastic one that came with the kit.

R
Raul Q.
Align 6 N Parts

All parts arrived on time as described.

b
bzzboy
Minor Issue with Use of this Clamp....

Fit, finish and utility are very nice. However, in 14 flights I’ve had the bolt on the right side fall out in flight on two occasions . Once with a fancy finishing cap, and once with a plain washer. No massive vibration is apparent in flight. Yes, I cleaned the bolt with IPA and used blue Permatex brand Loctite both times. All bearings in the head and tail are new and were regreased prior to installation. In 25+ years flying helis I haven’t had back to back failures like that before. The only thing I can think of is that my head/tail rpm must be at some resonant frequency with the support brace. Rather than use red next time I think I’ll change the rpm 50 or so in IU1 and see if it happens again. Good luck!

F
FaroukH
Align Metal Stabilizer Mount

Align Metal Stabilizer Mount, great product. Well finished

A
Anonymous
Item as expected

Item as described in listing, great upgrade for helis

S
Samuel H.

Much better than the plastic version

S
Sean P.

I installed this on my 550L and it really adds to the look of the helicopter. Also, I don't have to worry about stripping the old plastic one. The fitment is excellent and no tape is required for a tight fit to the tail boom. This and the metal vertical stab will really secure you tail boom. Anyhow great price and a great upgrade, I highly recommend it.

A
Anonymous

Great upgrade for Helis that don't already come with this

Customer Reviews

Based on 9 reviews
100%
(9)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Cory T.
Durable Crash Replacement

Survivor or crashes more often than the plastic ones. It should have been in the kit.

M
Michael
A little bling for my new machine

This looks a lot more professional than the plastic one that came with the kit.

R
Raul Q.
Align 6 N Parts

All parts arrived on time as described.

b
bzzboy
Minor Issue with Use of this Clamp....

Fit, finish and utility are very nice. However, in 14 flights I’ve had the bolt on the right side fall out in flight on two occasions . Once with a fancy finishing cap, and once with a plain washer. No massive vibration is apparent in flight. Yes, I cleaned the bolt with IPA and used blue Permatex brand Loctite both times. All bearings in the head and tail are new and were regreased prior to installation. In 25+ years flying helis I haven’t had back to back failures like that before. The only thing I can think of is that my head/tail rpm must be at some resonant frequency with the support brace. Rather than use red next time I think I’ll change the rpm 50 or so in IU1 and see if it happens again. Good luck!

F
FaroukH
Align Metal Stabilizer Mount

Align Metal Stabilizer Mount, great product. Well finished

A
Anonymous
Item as expected

Item as described in listing, great upgrade for helis

S
Samuel H.

Much better than the plastic version

S
Sean P.

I installed this on my 550L and it really adds to the look of the helicopter. Also, I don't have to worry about stripping the old plastic one. The fitment is excellent and no tape is required for a tight fit to the tail boom. This and the metal vertical stab will really secure you tail boom. Anyhow great price and a great upgrade, I highly recommend it.

A
Anonymous

Great upgrade for Helis that don't already come with this