Align T-REX 470LT (Torque Tube) Dominator Super Combo - RH47E09XT

Align
|
RH47E09XT
You will earn 567.99 points for buying this product
Price Match Guarantee
$511.19 $567.99( / )
Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment. Align's most anticipated helicopter release in 2016 the T-REX 470LT is born. No matter whether you are a newcomer or a professional, the brand new T-REX 470LT will give you the...
RH47E09XW

Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment. Align's most anticipated helicopter release in 2016 the T-REX 470LT is born. No matter whether you are a newcomer or a professional, the brand new T-REX 470LT will give you the new flying feel again.

470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from Ø5mm to Ø6mm, while the feathering shaft outer dimension was increased from Ø4mm to Ø5mm. The 470LT has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery. The 470L utilizes a new torque drive assembly, highly reduce gear abrasion and increase power output gives more direct and precise flight performance and extraordinary tail performance. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470LT is equipped with the large outer diameter 470MX motor(1800KV/2818) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor. The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to V8.4, high voltage input, improving the servos torque and speed. The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification. The new high-end electronics effectively enhance flight performance.

T-REX 470LT is designed with 380mm main blade and torque drive system, which makes it more stable and more powerful. Its superior tail lock performance and flying control feel is super and way beyond your imagination.

RH47E09XW

New 470 canopy features in aerodynamic design with durable fiber lightweight material providing the best protection in flight. The new canopy, its enlarge clean-cut outfit makes the overall body shape more balance and stylish.

RH47E09XW

Extended 380mm main blades effectively improve the flying stability and power performance. The new engineered airfoil design effectively reduces turbulence at the end of the main blades,this saves power consumption during extreme 3D flight. New 69 size tail blades are longer in length and offer superior tail holding performance, even during demanding 3D flight.

 
RH47E09XW

Brand new 470 V2 Main Rotor Holder allow to provide the best stability and precise control no matter you are flying in static flight or 3D dynamic flight.

RH47E09XW

Brand New 470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. Brand New 470 Main Shaft and Feathering Shaft: Main Shaft outer dimension increased from Ø5mm to Ø6mm, while the Feathering Shaft outer dimension increased from Ø4mm to Ø5mm,effectively strengthening the Main and Feathering Shaft while improving durability.

 
RH47E09XW

New 470MX motor features; high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. The 470MX is capable of maintaining consistent torque and head speed through continuous 3D maneuvers. 470MX motor is designed for 3D flight.

RH47E09XW

Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure.

 
RH47E09XW

Carbon fiber side frame plates are manufactured using a proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.

RH47E09XW

An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

 
RH47E09XW

Brand new latching battery tray which utilizes integrated mounting rails inside the frames to simplify insertion / removal of battery while providing protection for the battery.

RH47E09XW

Specially designed for T-REX 470 providing higher currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be set up based on servo specification.

 
RH47E09XW

DS350M HV Cyclic and DS455 HV Rudder servos support up to 8.4V for superior responsiveness, extreme torque, and improved performance.

RH47E09XW

Highly reduce gear abrasion and increase power output gives more direct and precise flight performance and extraordinary tail performance. The new high intense Torque Tube allow to reduce gear abrasion and extend the gear lifetime value in extreme flight dynamics.

 
RH47E09XW

Landing skid is tilted 5 degrees forward to improve crashworthiness.

RH47E09XW

Newly designed vertical tail servo mount to improve CG while increasing the responsiveness of 3D flight.

 
RH47E09XW

A wider Tail Boom to improves the torsional strength. Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

RH47E09XW

Designed using a proprietary material integration technology which creates a unique look and improves the Vertical Stabilizer's stiffness.

 
RH47E09XW

The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder resolution and precision.

RH47E09XW

The new tail rotor holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of the tail performance when using 69 size Tail Blades.

 

Standard equipment

• Microbeast PLUS Flybarless System X 1 set
• RCE-BL50X 50A Brushless ESC X 1
• 470MX Brushless Motor(1800KV/2818) X 1
• DS450M Digital Servo X 3
• DS455M Digital Servo X 1

RH47E09XW

Specification

●Length: 755mm
●Height: 210mm
●Width: 108mm
●Main Blade Length: 380mm
●Main Rotor Diameter: 850mm
●Tail Rotor Diameter: 181mm
●Motor Pinion Gear: 11T
●Main Drive Gear: 121T
●Autorotation Tail Drive Gear: 104T
●Tail Drive Gear: 28T
●Drive Gear Ratio: 11:1:3.71
●Weight(w/o battery): Approx. 871g

Accessories

●T-REX 470LT DOMINATOR Set x 1
●380 Carbon Fiber Blades x 1set
●69 Tail Blade x1set
●470MX Brushless Motor(1800KV/2818) x 1
●DS450M Digital Servo x 3
●DS455M Digital Servo x 1
●RCE-BL50X 50A Brushless ESC x 1


Radio transmitter and electronic equipment required for assembly:
●Transmitter(6-channel or more,helicopter system)
●Receiver(6-channel or more)
●Pitch gauge or Digital Pitch Gauge
●6S Li-Po 1400~1900mAh battery x 1
 
Type: 

Helicopter Kit

Vendor: 

Align

SKU: 

RH47E09XT

Weight: 

4.5 lb


Product Spare Parts


Electronics

Customer Reviews

Based on 8 reviews
75%
(6)
25%
(2)
0%
(0)
0%
(0)
0%
(0)
M
M.D.
Excellent product!

Package arrived fast. HeliDirect pays attention to there customers, every time I contact them they where prompt and solved quickly all the details. Product, flawless like always. It is a pleasure to assemble such quality product. Can't wait to have it in the air!

M
M.J.
T-Rex 470LT

This heli is awesome! Had it built in a week and took a couple days longer to learn and tweak the setups on the Microbeast. This heli has plenty of power and is a beast. It flies wonderful, very stable even in gusty, windy, situations. I'm convinced that anyone who complains about this model is either a newbie, or cant understand the dynamics of RC heli's. I have an old 450 Pro I built in 2008 with the flybar and understand feeling overwhelmed when you first get into this hobby, be patient and thorough, and always double check your build and setups

L
L.
Haven't assembled yet but everything looking really good

Haven't assembled yet but everything looking really good, colors, metal high cnc quality, and TT drive make it best for rich people 😀

A
A.R.
Trex 470LT Dominator super combo kit

I'm very happy with this kit. It is has very high quality components and lots of aluminum upgrades. It is a step up from the 450L and is what it should have been. I really like Align going back to a more traditional fbl head with a swash mixing follower that they call the EFL. It is more rigid and precise than the DFC on my 450L. It only came with one gyro mount as opposed to my 450L with two and the tail support bracket is plastic as well but there is a metal upgrade like my 450L already has.

J
J.C.
Nice R/C Helicopter

I've owned several of the Align Helicopter kits and this one is right up there them. Assembly was straightforward and the calibration procedures were easy to follow. Only issues I had were a missing canopy grommet, but since I had spares, it wasn't a problem, and the instructions reference parts bags that don't exist. Best advice I can give is pay attention to your servo wire routing, not a lot of space for wire slop. Excellent kit and very happy.

H
H.O.I.
Align 470LT

Excellent kit, good build, good flier. Well worth the money

C
C.W.
align 470

Just finished the build and first four flights. The heli flies great I am very happy with the way it flies .The instructions for building are not the easiest to follow. That is the only complaint I have

R
R.M.

Rather than partially assemble the bird with instructions to disassemble and apply locktite, etc...just label the parts bags properly. The instructions reference parts bags that don't exist. The helicopter itself is of course outstanding,