- Home
- 180-220 Electronics
- Castle Creation Talon 35,...
Castle Creation Talon 35, 25V 35 AMP ESC, W/Heavy Duty BEC
Talon 35: Little package, big BEC.
This "mighty mini" can take on the most extreme maneuvers while keeping it’s cool. Talon 35 is intended for use in 450 Heli setups running up to 6S or .10 to .20 fixed wing applications pulling up to 35 amps and boasts a 7 amp peak/5 amp continuous BEC, keeping even the most draining servos at ease. Talon 35 also offers Castle’s industry-leading helicopter functions, not to mention easy programming using the Castle Link USB adapter (coupon included). The compact layout and thin profile make mounting Talon 35 simple and stress-free in any setup.
Item number | 010-0122-00 | ||
Input voltage | MIN: 2S LiPo MAX: 6S LiPo | ||
Max continuous amperage at full throttle | 35 amps* | ||
BEC voltage (voltage regulator for powering radio and servos) | 5.5 volts | ||
BEC output | 7 amp peak** 5 amp continuous (always check servo draw prior to first flight) | ||
Dimensions | Width: 0.88" (22.4mm) | ||
Weight (with wires) | 0.98 oz. (27.8g) | ||
Weight (without wires) | 0.42 oz (12g) | ||
Items needed for operation or installation | Battery connector and motor connectors sold separately | ||
Programmability | Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link adapter included in package) and freely downloadable Castle Link Windows |
*RC HOBBY APPLICATION RATING: 35 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.
**Peak indicates amperage sustainable for most servos’ current draw transients. Always confirm servo current draw before the first flight of the model.
Type: | |
---|---|
Vendor: | |
SKU: |
010-0122-00 |
Weight: |
0.65 lb |
Product Spare Parts
I have this one my Oxy 3 and it works great. I am running 6S and it comes down warm, but not hot. The setup is easy with the CC cable and adapter. The governor works well too, but not great. I feel it doesn't hold the headspeed as well I want, but overall its a great ESC.
I put this on an Oxy 3 tareq edition helicopter and it worked great. Only thing I wish the bec put out more than 5.5 volts
Bought this for a 450 heli build. Works great, nice set of options. You'll definitely want to set the personal preferences in the Castle Link software, as well as updating the firmware to the latest revision. Another great Castle Creation product.
I really like the setup options and especially how you can change the spin-up speed to slow for a more authentic helicopter start up.
Be sure to the the USB Link as well to adjust your settings for best performance. Very neat slow start and quite powerful BEC in a tiny package.
Best esc for Blade 300. Awesome product
I have this one my Oxy 3 and it works great. I am running 6S and it comes down warm, but not hot. The setup is easy with the CC cable and adapter. The governor works well too, but not great. I feel it doesn't hold the headspeed as well I want, but overall its a great ESC.
I put this on an Oxy 3 tareq edition helicopter and it worked great. Only thing I wish the bec put out more than 5.5 volts
Bought this for a 450 heli build. Works great, nice set of options. You'll definitely want to set the personal preferences in the Castle Link software, as well as updating the firmware to the latest revision. Another great Castle Creation product.
I really like the setup options and especially how you can change the spin-up speed to slow for a more authentic helicopter start up.
Be sure to the the USB Link as well to adjust your settings for best performance. Very neat slow start and quite powerful BEC in a tiny package.
Best esc for Blade 300. Awesome product