FURITEK LIZARD 20A/40A Brushed/Brushless Esc for AXIAL SCX24 with FOC Technology

Furitek
|
FUK-2025
You will earn 49.99 points for buying this product
Price Match Guarantee
$49.99 $0.00( / )
*** Furitek Esc is not compatible with HRZ00015 Board *** The difference between FURITEK TEGU Main Board for Axial SCX24 and FURITEK LIZARD esc is that the TEGU has higher BEC value and is capable of running 3s.  The LIZARD comes with lower BEC value than the TEGU and runs on...

*** Furitek Esc is not compatible with HRZ00015 Board ***

The difference between FURITEK TEGU Main Board for Axial SCX24 and FURITEK LIZARD esc is that the TEGU has higher BEC value and is capable of running 3s.  The LIZARD comes with lower BEC value than the TEGU and runs on 2s only.

Introduction:

The FURITEK LIZARD esc is designed to work with BOTH stock brushed motor and sensored/sensorless brushless motors of your favorite on the Axial SCX24 crawlers.  Designed with FOC (Field-oriented control) technology, it provides insane slow speed with powerful stable torque, low noise, high efficiency, and has a high-speed dynamic response. And with bluetooth module option, you can run telemetry and all amazing parameters on smart phone apps.  The difference between this LIZARD esc and TEGU Main Board for Axial SCX24 Crawler is that the TEGU main board includes servo out for extra application and LED control capability which the LIZARD does not have.  The LIZARD also has smaller BEC than the TEGU.

Features:

- Support sensorless brushless DC and brushed DC motor (config via app, default is brushless)
- FOC (Field-oriented control) technology
- Designed for AXIAL SCX24 crawlers.
- 5.5V-1.5A Built-in BEC
- Mini size and light weight
- Super easy programming via App on BOTH Android and IOS
- Firmware update available (bluetooth module required)
- Real-time telemetry up to 10Hz
- Support AAA batteries and 2s liPo battieres with automatic battery type recognition capability
- Ability to run with stock TX/RX or any other TX/RX


Specifications:
- Dimension (mm): 24(L)x12.4(W)
- Weight: about 2.1g
- Battery types: 4 AAA NiMH/2s liPo/ 2s LiOn
- Motor type: Sensored/Sensorless Brushless DC / Brushed DC
- BEC output: 5.5V/1.5A
- Constant Current : 20A
- Burst Current : 40A
- Waterproof : NO

 

Recommended Motors:
-SCX24 stock motor
-Surpass 2204 1400KV
-Barrage motors
-RGT Motors
-Enduro24 Stock Motor
-CR18 Motor

 

Type: 

Car Electronics

Vendor: 

Furitek

SKU: 

FUK-2025

Weight: 

0.1 lb


Product Spare Parts


Electronics

Customer Reviews

Based on 12 reviews
75%
(9)
8%
(1)
8%
(1)
8%
(1)
0%
(0)
C
Customer
Exactly what I needed

Product came in a reasonable amount of time and was exactly what i ordered!

M
Michael O.
Top tier product!!

Once you switch over to Furitek you’ll never look back! Amazing slow speed control and with the added blue Bluetooth the real time telemetry is outstanding!

J
Jake H.
Awesome ESC

Works amazing, especially for the size and is very powerful and smooth

e
edgar g.
Great product

Great product, fast shipping.

R
Rc C.C.
Unsure, seems to be getting hot when under heavy load

I have purchased 3 Furitek’s lizards and 1 tegu total. I have yet to open 1 from most recent order but 2 from prior orders work great. I am having issue with 1 lizard when connected to a FS2A tx and ProModeler servo it gets hot near power switch at slow crawl. Unsure what to do to either get replacement. I have updated firmware. Tested a different lizard no issue. Unsure how to proceed.

F
Forrest S.

Hadn’t used Yet but a seems great

J
Jay M.
Fourth one

Good esc's

J
J.L.
Impressed

Exceeded my expectations. Reliable efficient hardware. Easy to use software with many options. Very satisfied and would recommend it over other brand esc's.

G
Gene S.
Furitex lizard

I took it out of package and I could not get no power 1 of the pins was bent touching a nother pin got it separated and I got it to work

S
Stan S.
Waiting on Bluetooth module

When I get the module I’ll write a review.

Customer Reviews

Based on 12 reviews
75%
(9)
8%
(1)
8%
(1)
8%
(1)
0%
(0)
C
Customer
Exactly what I needed

Product came in a reasonable amount of time and was exactly what i ordered!

M
Michael O.
Top tier product!!

Once you switch over to Furitek you’ll never look back! Amazing slow speed control and with the added blue Bluetooth the real time telemetry is outstanding!

J
Jake H.
Awesome ESC

Works amazing, especially for the size and is very powerful and smooth

e
edgar g.
Great product

Great product, fast shipping.

R
Rc C.C.
Unsure, seems to be getting hot when under heavy load

I have purchased 3 Furitek’s lizards and 1 tegu total. I have yet to open 1 from most recent order but 2 from prior orders work great. I am having issue with 1 lizard when connected to a FS2A tx and ProModeler servo it gets hot near power switch at slow crawl. Unsure what to do to either get replacement. I have updated firmware. Tested a different lizard no issue. Unsure how to proceed.

F
Forrest S.

Hadn’t used Yet but a seems great

J
Jay M.
Fourth one

Good esc's

J
J.L.
Impressed

Exceeded my expectations. Reliable efficient hardware. Easy to use software with many options. Very satisfied and would recommend it over other brand esc's.

G
Gene S.
Furitex lizard

I took it out of package and I could not get no power 1 of the pins was bent touching a nother pin got it separated and I got it to work

S
Stan S.
Waiting on Bluetooth module

When I get the module I’ll write a review.