Features:
AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
Extreme light 1S 65mm Brushless HD whoop only 27g
Come with Runcam Split3-lite 1080P HD DVR
Smooth and agile
Compatible for 1S Lipo/LIHV
Camera Angle adjustable
Specifications:
Brand Name: Happymodel
Item Name: Mobula6 HD 1S 65mm Brushless whoop HD drone BNF version
Wheelbase: 65mm
Size: 80mm*80mm*40mm
Weight: 27g
Receiver: Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Spare parts specifications:
Motor
- Mode: EX0802 19000KV
- Configu-ration: 9N12P
- Stator Diamter: 8mm
- Stator Length: 2mm
- Shaft Diameter: Φ1mm
- Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
- Weight(g): 1.7g
- No.of Cells(Lipo): 1S only
Propellers
- Gemfan 1219-3
- Center Thickness: 5mm
- Prop Disk Diameter: 31mm
- Center Hole Inner diameter: 1.0mm
- Weight: 0.28g
Flight controller
(Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
- MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000(SPI connection)
- Board size: 28.5 * 28.5MM
- Power supply: 1S battery input (DC 2.9V-4.35V)
- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G VTX
- Built-in SPI Frsky/Flysky receiver
- Built-in 5V 1A BEC
- Built-in voltage detection
Onboard 4in1 ESC
- MCU upgraded to EFM8BB21
- Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: O_H_5_REV16_7.HEX
- Default protocol: DSHOT600
Onboard Frsky SPI D8 receiver Version
- SPI BUS receiver Frsky D8 compatible
- Compatible Non EU transmitter D8 modelChannels: 8ch
- Failsafe support
- No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
Onboard 5.8g VTX
- Output power: 25mw
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA(type)
- Frequency: 5.8GHz 5bands 40 channels
- With Race bandSmartaudio ready
Runcam Split3-Lite
- Model: RunCam Split3-Lite
- Field of View(FOV): Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3)
- Video Resolution: 1080@60fps/1080@50fps/1080@30fps/720@60fps
- Video File Format: MOV
- Image Resolution: 2 MP
- TV Mode: NTSC (720*480)/PAL (720*576) Switchable
- Interface: JST 1.25mm / UART and SH 1.0mm
- Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III)
- Hole Distance of Installation: 25.5*25.5mm
- PCB Size: 29*29mm
- Lens Module Size: 14*14mm
- Lens Specs: M9
- Power Input: DC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.)
- Working Current: 450mA @5V
Lipo Battery
- Capacity: 250mAh
- Voltage: 3.8v
- Continuous Discharge Rate: 30C
- Size: 55mmx12mmx7mm
- Weight: 6.5gConnector: PH2.0
Package Included:
1 x Mobula6 1S 65mm Whoop Drone Frame
1 x SPI Receiver: Crazybee F4 Lite FC Built-in Frsky SPI D8 RX
4 x EX0802 KV19000 Brushless Motor
1 x Gemfan 1219-3 Propellers(4cw+4ccw)
1 x Runcam Split3-lite 1080P HD Camera +DVR
1 x 5.8G 25mW 40ch VTX (Flight Controller Built-in)
4 x 1S 250mah 30C LiHV Battery
1 x 1S Lipo/LIHV USB Charger
1 x Propeller Disassemble Tool
