NexxRacing Scx24 Front Suspension Bracket (BLACK )

NexxRacing
|
NX-260-BL
You will earn 16 points for buying this product
Price Match Guarantee
$16.00 $0.00( / )
Included : 2 x Phillips Pan Head Screws M1.4x6mm 2 x Aluminum Washer 2x3x1.5mm

Included :

  • 2 x Phillips Pan Head Screws M1.4x6mm
  • 2 x Aluminum Washer 2x3x1.5mm
Type: 

Car Parts

Vendor: 

NexxRacing

SKU: 

NX-260-BL

Weight: 

0.1 lb


Product Spare Parts


Electronics

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Russell H.
Well made product

Very nice quality. I purchased this for the shock and body post mounts because I needed clearance for the Furitek Komodo brushless conversion. The carbon plate is nice but I didn’t use it. The mounts worked perfectly and do not make contact with the spinning head of the out-runner motor (*Note: I have 1mm aluminum spacers between the motor/transmission and motor mount). Depending on other brushless set-ups, it may require filing down an edge a little for clearance. Will purchase again for future builds.

K
Kyle B.
Great fit. Carbon fiber is awesome

Nice fit and finish. Wish nexx made more stuff.

C
Charles R.
Quality item used in a unique way

Good quality, and the carbon plate looks great. I used the individual shock mounts without the plate on the backside to install a Furitek Komodo brushless motor. Even with these it's still tight, so I hand bent the frame rails outward slightly. I ended up using the carbon plate by turning it sideways and put it in between the shock mounts by sandwiching it between screws above and below it on all four sides. There's not enough space to mount the esc, so I mounted that in the very back of the frame, and I use the plate up front to add on small weights giving more traction when crawling up things

K
K.B.
Quality piece

The piece I received is well machined and lined up with the factory frame holes without issue. The carbon plate is a nice touch and the reason I went with this model over an all aluminum piece. The shock spacers are tiny and only two are included so use a screw tray and towel.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Russell H.
Well made product

Very nice quality. I purchased this for the shock and body post mounts because I needed clearance for the Furitek Komodo brushless conversion. The carbon plate is nice but I didn’t use it. The mounts worked perfectly and do not make contact with the spinning head of the out-runner motor (*Note: I have 1mm aluminum spacers between the motor/transmission and motor mount). Depending on other brushless set-ups, it may require filing down an edge a little for clearance. Will purchase again for future builds.

K
Kyle B.
Great fit. Carbon fiber is awesome

Nice fit and finish. Wish nexx made more stuff.

C
Charles R.
Quality item used in a unique way

Good quality, and the carbon plate looks great. I used the individual shock mounts without the plate on the backside to install a Furitek Komodo brushless motor. Even with these it's still tight, so I hand bent the frame rails outward slightly. I ended up using the carbon plate by turning it sideways and put it in between the shock mounts by sandwiching it between screws above and below it on all four sides. There's not enough space to mount the esc, so I mounted that in the very back of the frame, and I use the plate up front to add on small weights giving more traction when crawling up things

K
K.B.
Quality piece

The piece I received is well machined and lined up with the factory frame holes without issue. The carbon plate is a nice touch and the reason I went with this model over an all aluminum piece. The shock spacers are tiny and only two are included so use a screw tray and towel.