NexxRacing Scx24 Front Suspension Bracket (GREEN)
){kind=link}
Included :
- 2 x Phillips Pan Head Screws M1.4x6mm
- 2 x Aluminum Washer 2x3x1.5mm
| Type: | |
|---|---|
| Vendor: | |
| SKU: |
NX-260-GR |
| Weight: |
0.1 lb |
Product Spare Parts
Electronics
Customer Reviews
This is the only suspension mount that works with the Furitek Komodo Mini set up. Works great
They were missing the countersunk screws the carbon fiber platform is drilled for. Also, the cheesy aluminum shock spacers suck, throw some brass ones in there NR. The platform sits high and on the Deadbolt that causes a little interference with the receiver. Drop it down 5+mm NR. After installing, I noticed the shock towers lean inwards causing interference with the front servo and making it impossible to keep my magnetic body mount, also limiting suspension travel.
Speaking of suspension. Why are the shock holes drilled forward? Who mounts shocks like that NR? Now plan to purchase additional links to extend the front so I can have a good shock angle. NR, I believe you can do better for the Deadbolt/Betty. Though these are probably fine on the C10/Jeep.
Pleased with item.
Customer Reviews
This is the only suspension mount that works with the Furitek Komodo Mini set up. Works great
They were missing the countersunk screws the carbon fiber platform is drilled for. Also, the cheesy aluminum shock spacers suck, throw some brass ones in there NR. The platform sits high and on the Deadbolt that causes a little interference with the receiver. Drop it down 5+mm NR. After installing, I noticed the shock towers lean inwards causing interference with the front servo and making it impossible to keep my magnetic body mount, also limiting suspension travel.
Speaking of suspension. Why are the shock holes drilled forward? Who mounts shocks like that NR? Now plan to purchase additional links to extend the front so I can have a good shock angle. NR, I believe you can do better for the Deadbolt/Betty. Though these are probably fine on the C10/Jeep.
Pleased with item.