OMP M1 BNF Helicopter SFHSS Protocol Version - Yellow
Click here to download flight controller manual.
Setup on a Spektrum Transmitter: https://youtu.be/55Gd4TZV8eE
Setup on OpenTX - Radiomaster TX16s : https://youtu.be/WH1yCXtNqUk
How to adjust the Flight Controller : https://youtu.be/GX75PjIp6CE
NOTE:
This OMP Protocol version works with any OpenTX radio like Radiomaster TX16 or Jumper T16/T18 without external receiver. All you need is update the OMP firmware on your radio.
https://www.multi-module.org/using-the-module/protocol-details/omp
https://www.youtube.com/watch?v=PiuTGS3SHHg&t=321s
Then follow the Set up on OpenTX - Radiomaster TX16s video above to set up your helicopter.
If you have Spektrum Transmitter, you will need to use the DSM2 or DSMX satellite. You will have to bind the DSMX with your Spektrum radio before you put it on the helicopter. If you have any DSMX satellite with bind button on it, you can connect it directly to the helicopter and process the binding with your Spektrum radio by holding the binding button on the satellite while plug the battery on your helicopter.
If you have Futaba radio, you need to check if your radio support the SFHSS protocol. If it has SFHSS protocol on your radio, then you need to get the external SFHSS receiver. SKU: OSHM2055
----------
The highly anticipated OMPHobby M1 micro helicopter will be available this fall. This small sized helicopter inherits the great features of the bigger M2 brother, yet much smaller making it ideal for indoor flight in the winter. Product is expected to be shipped around the middle of November, but may encounter delay because of the busy holiday season. Three colors will be available: orange, purple, and yellow.
Click here to download flight controller manual.
Setup on a Spektrum Transmitter: https://youtu.be/55Gd4TZV8eE
Setup on OpenTX - Radiomaster TX16s : https://youtu.be/WH1yCXtNqUk
How to adjust the Flight Controller : https://youtu.be/GX75PjIp6CE
Technical specifications:
Main motor: brushless
Rear motor: brushless
Main rotor diameter: 290 mm
Tail rotor diameter: 46.5 mm
Weight: approx. 118 g
Size: approx. 290mm * 88mm
Battery: 2S 350 mAh Lipo
Flight time: 5 - 8 min.
Servo: digital servo with metal gear
Receiver: integrated receiver, S-BUS and DSMX prepared
| Type: | |
|---|---|
| Vendor: | |
| SKU: |
OMP-M1-FHSS-Y |
| Weight: |
2.0 lb |
Product Spare Parts
Electronics
Customer Reviews
Best small heli I’ve ever flown! Nothing else comes close. This got me back into the hobby after 8 years. 👊🏽😎
Smaller than I had anticipated, but this thing is legit! Very powerful and nimble. I'd give it a 5, but after 9 flights the grommets that hold the canopy on have fallen apart and I'm down until replacements arrive.
Great micro heli flys really well. Very high quality for such a small heli. Well done OMP!
I’m amazed at the technology that they can put in such a small helicopter. Flies great and the stability mode is good for orientation training indoors when the weather is bad outside.
Such a joy to fly around the yard. This thing is rock solid and handles a decent breeze. I bought a ton of batteries to keep this heli in the air.
This is what the Blade 130 should have been. Very stable and crashes well. Easy to change programming, similar to the BeastX. The M1 flys very well.
Customer Reviews
Best small heli I’ve ever flown! Nothing else comes close. This got me back into the hobby after 8 years. 👊🏽😎
Smaller than I had anticipated, but this thing is legit! Very powerful and nimble. I'd give it a 5, but after 9 flights the grommets that hold the canopy on have fallen apart and I'm down until replacements arrive.
Great micro heli flys really well. Very high quality for such a small heli. Well done OMP!
I’m amazed at the technology that they can put in such a small helicopter. Flies great and the stability mode is good for orientation training indoors when the weather is bad outside.
Such a joy to fly around the yard. This thing is rock solid and handles a decent breeze. I bought a ton of batteries to keep this heli in the air.
This is what the Blade 130 should have been. Very stable and crashes well. Easy to change programming, similar to the BeastX. The M1 flys very well.