Product Details
The SK360 replaces the mechanical flybar on your R/C Helicopter, which makes it lighter, fly longer on the same battery charge, and reduces replacement parts costs. The result is a big step up for scale and performance models alike. Go flybarless!
SK360 Electronic Flybar setup and review on HELIFREAK
Download Manual
Software Setup Tutorial
Overview
Throw out your "1940’s-technology" mechanical flybar and replace it with a state of the art Digital Flybar. Rock solid hovering with a less complex, lighter rotorhead for more power or longer flight times!
The SK-360 Digital Flybar is a high performance, compact and lightweight electronic pitch and roll stabilizer for model helicopters of all sizes. Its function is to replace the traditional flybar (stabilizer bar) and its association linkages, boosting power, increasing flight times and reducing repair costs.
For 3D flying, dial up cyclic rates to the limit of blade stall, without losing any stability. This gives your heli lightning-quick 3D, with great performance in wind and a solid hover!
For Scale flying, cyclic rates can be dialed down for smooth, steady flight even in gusty wind. Both the look and the sound are more realistic. The SK360 flies great with 2, 3, 4, or 5 blades.
The SK-360 is a compact, single unit, and comes with a USB interface included. It weighs only 16 grams, and can be mounted upside-down, backwards, or rotated 90 degrees to fit in any heli.
The PC setup software lets you fully configure the swash mixing, servo motion, and stability. And, it's easy to upgrade the firmware at home so you'll benefit from any future product improvements with the click of your mouse. Plus, the setup software displays the precision PWM inputs and outputs, making it an excellent calibration tool for your servos and radio.
(Note: For nitro helis, the SK360 has now been tested up to 90 size)
Control Options:
· Adjustable Bell and Hiller ratio (direct vs. stabilized control)
· Adjustable roll (aileron) and pitch (elevator) rates
· Control feel is adjustable in-flight with optional Bank Switching & gain channel
Swashplate Options:
· Works with Digital or Analog servos
· Suitable for 120, 135/140, and 90 degree eCCPM, as well as mCCPM swashplates
· Swash Ring anti-binding algorithm
· Phase Trim adjustable to +-90°
· Swash servo-equalizing prevents uncommanded collective in aggressive maneuvers
High Performance:
· Synchronous, 12-bit precision (4096 step) PWM inputs from your radio
· Tightly grouped 12-bit servo PWM outputs for low swash motion error
· Super-accurate, crystal driven PWM timing
· Optional 125 Hz Digital servo frame rate
· Minimal lag (just a few milliseconds)
· Individually temperature compensated
· Wide input voltage range (up to 8.5 volts)
· Weight is only 16 grams
Package Contents:
· SK-360 Gyro unit
· Four receiver connection cables
· Four strips of 3M-4408tm mounting tape
· USB Interface with jumper
· USB Extension Cable
· CD with Interface Software
SK360 - Technical Specifications
|
Dimensions:
|
41 x 31 x 15 mm (1.6 x 1.2 x 0.6 in)
|
|
Weight (without cables):
|
16 grams (0.5 oz)
|
|
Operating Temp. Range:
|
-5c to +45c
|
|
Operating Voltage:
|
3.6 to 8.5 VDC
|
|
Power Consumption:
|
28mA
|
|
Wiring Gauge:
|
22 or 24
|
|
Input Signals:
|
3-4 Channels (PWM 700-2300 us)
|
|
Servo Options:
|
Analogue or Digital
|
|
Setup:
|
USB interface, or by Transmitter Sticks
|
|
Field Gain Settings:
|
Bell and Hiller Gain Dials, 0 - 100%
|
Check out Related products
