Wooden main blades. Prebalanced at manufacture.

●Shape: Symmetrical wing
●Length: 325X32mm
●Width: 4mm
●Shaft Diameter: 2.8mm
●Weight: 50g/set
●Balance stickerx2

3 sets COMBO - Great savings!

This combo set contains the following items: » 3 x Wooden 325mm Main Blades - Trex450 series    [HR1032]   $8.00 0.00 - 18.00 = -18Cost of separate parts: $24.00 You save $6.00

Current Reviews: 5

Submited By: Frank on 10/09/2009 _span style="text-decoration: underline;"_Great Blades at a great price!_/span_ I dont do any 3D, so with that known. All set balanced with very ilttle add to them (even had a set thats cg matched perfect with no adding). All three set tracked right on. You do need to fasten the grip ends to the wood.

Submited By: Jonathan on 05/26/2009 These seem to be as good as the align wooden blades. I've only used one of the the three sets, but it was near perfectly balanced. They tracked perfectly. On the the field, they easily handle sport flying. For less than half the price of the align blades, these are definitely a great value.

Submited By: Mike on 09/09/2008 Good blades for the price, I have them on my Belt CP. You have to sand the ends down to fit correctly in the blade grip. Mine were balance quite nicely from factory and I only had to add a little tape on the end. They track alright, not as great as the carbon blades, but great for what they are. Definitely a great buy for beginners.

Submited By: Derrick on 03/28/2008 BLADE WIDTH is 5mm, not 4mm as stated in the description. These will NOT fit in HDX-450v3 blade grips without sanding the plastic down a bit. I don't have a scale but I used an align blade balancer to sort the 6 blades from lightest to heaviest. The difference between the heavy and light blade was 7" worth of scotch tape placed near the tip of the lighter blade. I sorted the blades into 3 "sets" and no one set needed more than 3" worth of scotch tape at the tips. The blades definitely don't fly as well as the $24 carbon fiber blades and the tracking wasn't dead-on but they're the cheapest 325's I've found and seem like a great option to learn with.

Submited By: Jerry on 12/26/2007 These can only take 2500 RPM according to their package, but for the price they can't be beat. I was amazed at how close to balanced mine where when I took them out of the package, the included tracking tape actually brought them within tolerance. Just be warned that you will have to file a bit off of the plastic to get them into the blade grips on the Trex 450SE v2. Also don't foreget to epoxy the plastic to the wood.

Write Review

Average Customer Rating: Displaying 5 of 5 product reviews

There are currently no discussion.

Your Discussion * Required information   E-Mail Address:  * Password:  *   NOTE: HTML is not translated!

Displaying 0 of 0 Discussion