INJORA Aluminum Front & Rear Axle Housing Set for 1/30 Axial SCX30 Features: CNC-machined aluminum alloy for precise fit and long-term durability Black anodized finish resists corrosion and provides a clean, scale appearance Direct replacement for stock plastic axle housings with no modifications required...

INJORA Stainless Steel CVD Axle Shafts for 1/30 Axial SCX30 Features: Stainless steel construction for improved wear resistance and durability Upgraded front axle CVD design to replace the stock dogbone-style axle shafts Extended axle shaft threads by 1 mm allow the installation of wider...

INJORA Aluminum 23mm Oil Shocks for 1/30 Axial SCX30 Note:   Shock oil is not included. Shocks can be used with or without shock oil. Due to the compact size, adding oil may require a filling tool. Features: Two spring rates included (Soft, Hard)...

FURITEK NANOPYTHON 20A/50A BRUSHED/BRUSHLESS ESC WITH BUILT-IN WIRELESS MODULE FOR 1/18, 1/24, 1/30 & 1/32 RC CRAWLERS Furitek NanoPython ESC: The Smallest, Smartest, and Most Advanced Micro ESC Ever Made Meet the Furitek NanoPython, the next evolution in micro ESC design—even smaller than the legendary...

INJORA LCG Aluminum Chassis Kit for 1/30 Axial SCX30 Compatible with 1/30 Axial SCX30 Bronco, JLU, K10 Features: Premium 7075 Aluminum: CNC-machined rails for maximum rigidity and a lower center of gravity. Superior Clearance: Optimized 12.5° skid angle (vs. 9.5° stock) to glide over...

INJORA MBL32 G2 Waterproof Micro Brushless ESC for 1/24 1/18 RC Crawlers TRX4M Ascent18 SCX24 Programming Tutorial  Compatible with:  INJORA 1721 Purple Viper motors INJORA 2204 Fat Viper motors Features: The INJORA MBL32 G2, based on the AM32 firmware, is meticulously tailored for Micro...

INJORA Brass Inner Clamp Rings for INJORA 0.7" D18 Wheels Note: Only compatible with INJORA 0.7" D18 wheels such as: W7001 W7002 Features: CNC-machined brass inner clamp rings Each ring weighs 4.7g, adding weight to the wheels for improved stability Helps lower the center of...

For Axial SCX24, INJORA 0.05" 1.27mm Hex Screwdriver Tool Suit for 1/24 1/18 RC Crawler Cars: 1/24 RC Crawler Axial SCX24 AX24 1/30 RC Crawler Axial SCX30 Almost all of the INJORA 1.0" wheels Features: Made of high quality alloy steel Non-slip aluminium handle Resistant to...

INJORA MBL32-NANO Brushless ESC for 1/30 Axial SCX30 Note: Pre-configured and ready to run. No programming required. USB programmer card is not included. For use with INJORA brushless motors only. Damage caused by using other motors is not covered under INJORA warranty. Please use...

INJORA D19 0.7" Aluminum Beadlock Wheels for 1/30 Axial SCX30 (W7008) Note: Designed and tested for use with INJORA tires. Compatibility with tires from other brands may vary due to differences in bead design and tolerances. Features: CNC-machined aluminum for high precision and durability...

INJORA Green Viper 1621 Brushless Motor for 1/30 Axial SCX30 Note: Not compatible with the stock SCX30 ESC or transmitter. Only compatible with the INJORA MBL32 ESC. A transmitter and receiver with a CH2 port are required for use with the MBL32 ESC. Please...

INJORA 2.0mm+ Phillips Screwdriver 3.0mm Hex Nut Driver for 1/30 Axial SCX30 Features: Non-slip ergonomic handle ensures a stable and comfortable grip Precision-machined tips offer a secure fit and long-lasting durability Compact tip design provides better accessibility and easier operation on the SCX30 Phillips...

INJORA MBL32 G2 Waterproof Brushless ESC & 1721 Purple Viper Outrunner Motor for 1/24 Axial SCX24 Compatibility Notice: Transmission:  Only compatible with stock SCX24 transmission and INJORA metal transmission Chassis: Not compatible with carbon fiber chassis with angled skid plate. For stock SCX24 chassis, the ESC...

INJORA High Torque N30 PRO NANO Servo with Servo Saver for 1/30 Axial SCX30 INJORA N30 Pro Servo is a more powerful option for Axial SCX30 builds, designed with a stronger motor, faster response, and higher torque for heavier or more demanding setups. Features:...

REEFS is proud to introduce our high-torque metal gear servo designed specifically for the Axial SCX30. Housed in a machined aluminum case, this servo delivers an impressive 35 oz-in of torque at 6V—five times the torque of the stock servo. Built with all-metal gears and twice the weight of the stock servo,...

RADIANZ “TinyFlex” — Lightweight Bug Style & Smooth Trail Performance for Axial SCX30 RADIANZ SCX30 Bug Dunnie Airbrush Lexan Body – TinyFlex The RADIANZ TinyFlex body is designed to give your Axial SCX30 a clean, compact bug-inspired look while keeping the rig fully functional for real micro crawling....

Aluminum Slider  for SCX30 Cars Upgrade Parts

1144 Steel Hardening +4mm CVD with Brass +4mm Weight 4pcs/set for SCX30 Cars Upgrade Parts 8pcs/set

  INJORA 39*15mm 0.7" HAMROK Tires for 1/30 Axial SCX30 (T7027) Note: Designed and tested exclusively with INJORA wheels. Compatibility with wheels from other manufacturers is not guaranteed due to differences in design and tolerances. Features: Molded in the Super Soft & Sticky INJORA...

INJORA Ripple D19 Aluminum Beadlock Wheels for 1/30 Axial SCX30 (W7005) Note: Designed and tested for use with INJORA tires. Compatibility with tires from other brands may vary due to differences in bead design and tolerances. Features: CNC-machined aluminum for high precision and durability...