Overview The UBEC uses an efficient DC-DC regulator chip with a conversion efficiency of more than 90%. UBEC output voltage is adjustable in three stages (5.0/6.0/7.4 V) with a continuous current of 5A and a maximum of 15A. The voltage specifications allow the use...

Overview The UBEC uses an efficient DC-DC regulator chip with a conversion efficiency of more than 90%. UBEC output voltage is adjustable in three stages (6.0/7.4/8.4 V) with a continuous current of 10A and a maximum of 25A. The voltage specifications allow the use...

Specifications: PN  30606000 Linear Mode/Switch ModeHigh Voltage/Regular Switch modeHV Cont./Peak Current 25A/50A Input Voltage (of the Main Power Supply) 3S~18S LiPo (9V~80V) Input Voltage (of the Backup Power Supply) 1S~2S LiPo (/3-9V) Output Voltage 5.2V/6.0V/7.4V/8.4V Adjustable Input Wires Main Power Supply: Red-16AWG-270mm*1/Black-16AWG-270mm*1 Output Wires...

PowerBox Systems USB Interface Adapter Download Instruction Manual

The RC Power Buffer Capacitor and Voltage Protector is connected to a free Receiver/FBL port to protect the receiver or FBL from Back-EMF interference as well as minimize the possibility of brownouts. It’s highly recommended when the source of the power is far from...

XDFly Backup Capacitor 25F 12V (13.0V MAX) This size is enough for 30 seconds of hard stick movements to perform an emergency auto in the event of a BEC failure, or LIPO ejection. This is enough for most pilots as a safety, it also...

XDFly Backup Capacitor 25F 8.4V (9.0V MAX) This size is enough for 30 seconds of hard stick movements to perform an emergency auto in the event of a BEC failure, or LIPO ejection. This is enough for most pilots as a safety, it also...

XDFly Backup Capacitor 60F 8.4V (9.0V MAX) This size is enough for 30 seconds of hard stick movements to perform an emergency auto in the event of a BEC failure, or LIPO ejection. This is enough for most pilots as a safety, it also...

• Our custom cables are made using high-reliability connectors that don’t use terminals preventing the breakage of wires at the connector. • This is a 12 inch long, 3-conductor extension cable suited for the XGuard alarm port as well as other standard applications such...

Click here to read the manualXGuard Plus V3 C30 Backup for smaller Helis Backup Power Pack with 30 Farad capacitors with Telemetry, Alarm, Remote Off & Radio Switch portsTwo Telemetry portsOne Remote Off portOne Alarm portServo Back EMF protectorStatic electricity protector The HUGE difference...

Click here to read the manualXGuard Plus V3 C50 Backup Guard Backup Power Pack with 50 Farad capacitors with Telemetry, Alarm, Remote Off & Radio Switch portsTwo Telemetry portsOne Remote Off portOne Alarm portServo Back EMF protectorStatic electricity protector The HUGE difference between the...

The XGuard Pro C100 is for use in larger aircraft like gasser planes. It uses 100 Farad capacitors for extended emergency flight time. Monitoring, Protecting And Backup System Backup Power Pack with 100 Farad capacitorsOvervoltage protectorReverse polarity protectorShort Circuit protectorServo Back EMF protectorStatic electricity...

The YGE BattSwitch is a very compact buffer circuit that makes it possible to operate a BEC with a buffer battery and switch it off at the touch of a button. It differs from other buffer solutions in that it has no self-consumption when switched...